We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular 240-pin DDR3L DIMM with black chips and gold edge connectors

A-Tech

A-Tech 4GB DDR3L 1600 CL11 1.35V 240-Pin Desktop RAM Kingston ACR16D3LU1NGG/4G 2Rx8

SKU CH-A7TP-EEPEW

A 4 GB DDR3L desktop DIMM running at 1600 MHz with CL11 latency and 1.35 V operation

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • Tested Frequency1600
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCNo
  • Low-voltage 1.35 V DDR3L cuts power draw versus standard DDR3
  • 1600 MHz tested speed with CL11 latency for responsive desktop performance
  • 4 GB unbuffered non-ECC module fits 240-pin DIMM slots
  • Major-brand chipset tested for reliable AMD and Intel compatibility
  • Lifetime warranty backed by US-based technical support

4GB DDR3L Desktop Memory Upgrade

This single 4GB module uses DDR3L technology at 1600MHz with a CAS latency of 11. It is designed as a compatible replacement for the Kingston ACR16D3LU1NGG/4G part number in desktop systems.

240-Pin Unbuffered DIMM Build

The module follows the standard 240-pin DIMM form factor and operates at a low 1.35V voltage. Unbuffered design means it installs directly into consumer desktop motherboard slots without requiring registered memory support.

DDR3L Voltage and Speed Limits

DDR3L specification allows operation at 1.35V, reducing power draw compared to standard DDR3 while maintaining the 1600MHz data rate. Systems must support the DDR3L standard to recognise the lower voltage; older DDR3-only platforms may not boot correctly with this module.

Highlights

  • Low-voltage 1.35 V DDR3L cuts power draw versus standard DDR3
  • 1600 MHz tested speed with CL11 latency for responsive desktop performance
  • 4 GB unbuffered non-ECC module fits 240-pin DIMM slots
  • Major-brand chipset tested for reliable AMD and Intel compatibility
  • Lifetime warranty backed by US-based technical support

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
Tested Frequency1600
CAS LatencyCL11
Voltage1.35V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Questions about this item

Does DDR3L 1600 PC3L-12800 limit real-world throughput to 12 800 MB/s?

Yes, the PC3L-12800 rating caps the maximum theoretical bandwidth at 12 800 MB/s; actual throughput will be lower due to overhead and system configuration.

Will a 240-pin DIMM fit my desktop motherboard slot?

The module uses the standard 240-pin DDR3 DIMM form factor, so it fits any desktop motherboard with a DDR3 DIMM slot.

How do I install the stick, and what step do people often miss?

Power off the PC, open the case, align the notch on the module with the slot key, press down firmly until both side clips click, then verify the new capacity in BIOS.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.