We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3L UDIMM with black chips, ECC label

A-Tech

A-Tech 4GB DDR3L 1600 ECC UDIMM 1Rx8 1.35V 240-Pin Server Memory

SKU CH-5MHA-98A6E

4GB DDR3L 1600 ECC unbuffered DIMM built as a Samsung M391B5173EB0-YK0 and M391B5173QH0-YK0 equivalent at PC3L-12800 speed

  • Capacity4GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ECC protection prevents data corruption in server workloads
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz CL11 timing delivers responsive throughput for virtualisation
  • 240-pin UDIMM fits standard unbuffered server slots
  • Samsung M391B5173EB0-YK0 and M391B5173QH0-YK0 direct replacements ensure drop-in compatibility

4GB DDR3L ECC UDIMM for servers

This 4GB DDR3L 1600 module adds error-correcting memory to compatible servers and workstations. It runs at 1.35V with CL11 latency in a single-rank 1Rx8 layout. The 240-pin unbuffered DIMM fits standard DDR3 slots that accept low-voltage ECC UDIMMs.

Direct Samsung replacement modules

The stick is validated as a compatible equivalent for Samsung M391B5173EB0-YK0 and M391B5173QH0-YK0 part numbers. Major-brand chips are used throughout and every unit undergoes quality-assurance testing before shipment. This reduces the risk of mismatched timings or voltage when swapping out original Samsung memory.

Single-rank 1Rx8 ECC unbuffered design

The module uses one rank of eight-bit-wide chips with ECC parity and no register buffer. Systems that require registered DIMMs or dual-rank population rules will not accept this module. Verify the motherboard manual for UDIMM-only slots and maximum rank-per-channel limits before ordering.

Highlights

  • ECC protection prevents data corruption in server workloads
  • 35V DDR3L reduces power draw versus standard DDR3
  • 1600 MHz CL11 timing delivers responsive throughput for virtualisation
  • 240-pin UDIMM fits standard unbuffered server slots
  • Samsung M391B5173EB0-YK0 and M391B5173QH0-YK0 direct replacements ensure drop-in compatibility

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

Will the 1Rx8 ECC chips need replacement under normal server workloads?

The module uses major-brand DRAM chips tested to A-Tech quality standards and carries a lifetime warranty; no scheduled chip replacement is required.

What limit appears first when the DIMM runs at DDR3L 1600 continuously?

The CL11 CAS latency at 1600 MHz sets the timing boundary, while the 1.35 V DDR3L voltage ceiling defines the thermal envelope.

How much heat and power does the 1.35 V UDIMM produce in 24/7 operation?

At 1.35 V the low-voltage DDR3L design draws less power and generates less heat than standard 1.5 V DDR3, keeping thermals modest in a 240-pin slot.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.