We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

A-Tech

A-Tech 4GB DDR4 2400MHz CL17 1Rx8 desktop RAM for Kingston HX424C15FB3/4 KVR24N17S8/4

SKU CH-K601-66MSB

4GB DDR4 2400MHz CL17 desktop DIMM replaces Kingston modules with 1.2V unbuffered operation

  • Capacity4GB
  • SpeedDDR4 2400 (PC4 19200)
  • Tested Frequency2400
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCNo
  • Boosts multitasking with 4GB DDR4 2400MHz module
  • Low 1.20V operation cuts power draw and heat
  • CL17 latency keeps data flowing for responsive apps
  • 288-pin UDIMM fits standard desktop slots directly
  • Tested quality ensures reliable performance for AMD and Intel systems

4GB DDR4 2400MHz Desktop Module

This A-Tech module provides 4GB of DDR4 memory at 2400MHz for desktop systems. It uses a 288-pin DIMM form factor and operates at the standard 1.20V voltage. The unbuffered, non-ECC design suits mainstream AMD and Intel platforms.

DDR4 2400 Speed and CL17 Timing

The DDR4 2400 interface sets the maximum data rate at 2400 MT/s with a PC4-19200 bandwidth rating. CAS latency is fixed at CL17, which determines the minimum delay before data becomes available. These parameters define the practical performance ceiling for this module.

1Rx8 Single-Rank Configuration

The module is organised as 1Rx8, meaning it uses a single rank of eight-wide memory chips. This layout affects how the memory controller addresses the module and can influence compatibility with certain motherboards that limit rank population. Verify your system supports single-rank DIMMs before purchase.

Highlights

  • Boosts multitasking with 4GB DDR4 2400MHz module
  • Low 1.20V operation cuts power draw and heat
  • CL17 latency keeps data flowing for responsive apps
  • 288-pin UDIMM fits standard desktop slots directly
  • Tested quality ensures reliable performance for AMD and Intel systems

Specifications

BrandA-Tech
Capacity4GB
SpeedDDR4 2400 (PC4 19200)
Tested Frequency2400
CAS LatencyCL17
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Questions about this item

Should I choose the 4GB single module or a multi-module kit for my upgrade?

This listing is a single 4GB DDR4 2400MHz CL17 module. Select one stick if your board has a free 288-pin slot and you only need 4GB; add a second identical module if you want 8GB in dual-channel mode.

What does the 2400MHz speed rating deliver in an actual desktop?

The module runs at 2400MHz with CL17 timing at 1.20V. Your motherboard will set the final frequency, but the stick is validated for PC4-19200 bandwidth on compatible AMD and Intel platforms.

Does the DDR4 288-pin DIMM interface limit the usable speed on my board?

The 288-pin DDR4 DIMM fits standard desktop slots. The memory controller on your CPU or chipset determines the maximum operating frequency; this module is rated for 2400MHz and will down-clock if the platform supports a lower ceiling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.