SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00496655BTC
In stock
A-Tech
A-Tech 4GB DDR4 2666MHz CL19 1.2V SODIMM 1Rx16 Kingston replacement laptop RAM
4GB DDR4 2666MHz laptop SODIMM module with CL19 latency and 1.2V operation
- Capacity4GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.20V
- ECCNo
- 4GB capacity expands multitasking headroom for everyday workloads
- DDR4 2666MHz speed accelerates data transfer rates
- CL19 latency supports responsive system operation
- 2V standard voltage reduces power draw
- 260-pin SODIMM form factor fits compatible laptop slots
4 GB DDR4 2666 MHz SODIMM for laptop upgrades
This 4 GB DDR4 module runs at 2666 MHz with CL19 latency and 1.2 V operation. It fits 260-pin SO-DIMM slots in laptops, notebooks and all-in-one systems. The unbuffered, non-ECC design matches mainstream consumer platforms. It replaces Kingston part numbers KVR26S19S6/4, KCP426SS6/4, HP26D4S9S1ME-4 and KKN2NM-MIE.
Major-brand chips on a standard 260-pin PCB
The stick uses major-brand DRAM components mounted on a conventional green PCB with gold edge contacts. No heat-spreader or tall profile is present, so it clears tight chassis spaces and low-profile CPU coolers. Single-rank 1Rx16 organisation keeps electrical loading light for broad motherboard compatibility. Installation is a simple press-in action requiring no tools.
Low-voltage DDR4 keeps thermals modest
At 1.2 V the module draws minimal power, producing little heat inside a closed laptop chassis. Passive cooling from the system's existing airflow is sufficient; no active fan or extra ventilation is needed. The low power envelope helps preserve battery runtime during mobile use. Acoustic impact is zero because the component has no moving parts.
Highlights
- 4GB capacity expands multitasking headroom for everyday workloads
- DDR4 2666MHz speed accelerates data transfer rates
- CL19 latency supports responsive system operation
- 2V standard voltage reduces power draw
- 260-pin SODIMM form factor fits compatible laptop slots
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 4GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
What does the DDR4 2666 (PC4-21300) rating actually limit in daily use?
The module runs at 2666 MT/s with CL19 timing, so the memory controller caps bandwidth at the PC4-21300 level; faster CPUs will downclock to this speed.
Will the 260-pin SO-DIMM fit my laptop's memory slot?
Yes — it uses the standard 260-pin DDR4 SO-DIMM form factor, 1.2 V, unbuffered, non-ECC, matching the physical and electrical requirements of most laptop slots.
How do I install the stick, and what step do people usually miss?
Power off, unplug, open the access panel, align the notch with the key at roughly 30°, press in until the side clips click; the missed step is not seating it fully before locking the clips.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
