A-Tech 256GB (2x128GB) DDR4 2933 ECC LRDIMM 2S4Rx4 288-Pin Server RAM
- 256GB (2 x 128GB)
- 288-Pin DDR4 SDRAM
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
A 512GB quad-channel kit of four 128GB DDR4 2666 ECC load-reduced DIMMs for servers and workstations
Capacity 512GB (4 x 128GB)
This kit provides 512 GB of DDR4 memory across four 128 GB modules running at 2666 MHz with CL19 latency. It uses Load Reduced DIMM technology with ECC for error correction in server and workstation platforms. The octal-rank 3DS design increases density while reducing electrical load on the memory controller. It is intended for administrators upgrading compatible DDR4 server or workstation systems.
Load Reduced modules buffer the command and address signals, which lowers the electrical load on the memory bus when all four DIMMs are populated. This helps maintain signal integrity at 2666 MHz during continuous, high-throughput workloads such as virtualisation or large database operations. ECC detects and corrects single-bit errors on the fly, preventing data corruption over long uptimes. The 1.2 V standard voltage keeps power draw predictable under sustained utilisation.
Verify that your platform supports DDR4 LRDIMM modules with a 2S4Rx4 (8Rx4 3DS/TSV) rank structure and 288-pin form factor. Desktop and laptop systems cannot use this memory type. Consult the system manual for approved memory configurations, maximum capacity per channel, and required slot population rules. Ensure the BIOS or firmware is current enough to recognise octal-rank 3DS modules at full speed.
| Brand | A-Tech |
|---|---|
| Series | A-Tech DDR4 Server Memory RAM |
| Model | A-Tech 512GB (4x128GB) 2S4Rx4 PC4-2666V-L |
| Part Number | NE-SS-0710 |
| Capacity | 512GB (4 x 128GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Load Reduced |
| Rank | 2S4Rx4 (8Rx4 3DS/TSV) |
| Multi-channel Kit | Quad Channel Kit |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand Chips |
Other versions of this model
Same family, different memory, cooler or clock — compare before you commit.
Each 128 GB module runs at the standard DDR4 voltage of 1.20 V, so the four-module kit operates at that same level without elevated power draw.
The board must provide DDR4 288-pin slots, support quad-channel memory, and accept Load Reduced ECC DIMMs with 2S4Rx4 octal-rank organisation.
No — the 2S4Rx4 3DS/TSV design presents eight logical ranks per DIMM, so the platform must explicitly support octal-rank Load Reduced memory.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?