We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green-black bare DDR5 DIMMs, 288-pin, 32GB each

A-Tech

A-Tech 64GB (2x32GB) DDR5 5200MHz CL42 1.1V Desktop RAM Kit

SKU CH-CMGK-9AQM9

Dual-channel 64 GB kit with two 32 GB DDR5 modules running at 5200 MHz CL42 and 1.1 V for desktop towers

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5200 (PC5 41600)
  • Tested Frequency5200
  • CAS LatencyCL42
  • Voltage1.10V
  • ECCNo

Capacity 64GB (2 x 32GB)

Speed DDR5 5200 (PC5 41600)

CAS Latency|Color CL42|Green/Black

  • 64 GB total capacity lets you run heavier workloads with 2 x 32 GB modules
  • DDR5 5200 MHz speed rated at PC5-41600 for fast data transfer
  • CL42 CAS latency delivers responsive timing at standard voltage
  • 10 V DDR5 standard voltage reduces power draw compared to higher-voltage kits
  • 288-pin DIMM form factor fits current DDR5 desktop motherboards

64GB DDR5 5200 Kit

This A-Tech kit delivers 64GB of DDR5 memory across two 32GB modules running at 5200MHz with CL42 latency at 1.10V. It is built for desktop towers that accept 288-pin unbuffered non-ECC DIMMs and is validated for both AMD and Intel platforms.

Tool-free DIMM installation

Installation follows the standard DIMM procedure: align the notch on the 288-pin module with the slot key, press down until the retention clips click, and repeat for the second stick to populate a dual-channel pair. The most common issue is seating only one side of the module, which prevents the system from posting; ensure both clips engage fully.

High-capacity desktop upgrades

This kit suits users who need 64GB for content creation, virtualization or heavy multitasking on a DDR5-capable motherboard. Builders requiring ECC, registered modules, lower CAS latency, or speeds above 5200MHz should consider alternative memory.

Highlights

  • 64 GB total capacity lets you run heavier workloads with 2 x 32 GB modules
  • DDR5 5200 MHz speed rated at PC5-41600 for fast data transfer
  • CL42 CAS latency delivers responsive timing at standard voltage
  • 10 V DDR5 standard voltage reduces power draw compared to higher-voltage kits
  • 288-pin DIMM form factor fits current DDR5 desktop motherboards

Specifications

BrandA-Tech
SeriesA-Tech DDR5 Desktop Memory RAM
ModelA-Tech 64GB (2x32GB) DDR5-5200 Desktop RAM Kit
Capacity64GB (2 x 32GB)
SpeedDDR5 5200 (PC5 41600)
Tested Frequency5200
CAS LatencyCL42
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitDual Channel Kit
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseAMD & Intel Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will this DDR5 5200 kit run at its rated speed on my motherboard?

The kit is tested at 5200 MT/s with CL42 latency at 1.1 V. Your motherboard and CPU must support DDR5 5200 to reach that speed; otherwise it will run at the highest speed they both allow.

Does my desktop need any special cooling for these modules?

The modules have no heat spreader and operate at the standard 1.1 V. Typical case airflow is sufficient for most workloads; add directed airflow only if you run sustained heavy loads in a tight chassis.

Can I mix this 64 GB kit with my existing 32 GB DDR5 sticks?

Mixing kits is possible but not guaranteed. For best stability use identical modules — same capacity, speed, voltage and timings — in the correct dual-channel slots.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.