NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
64 GB DDR5 4800 ECC registered server DIMM with CL40 latency and 1.1 V operation
The A-Tech 64GB DDR5 4800 ECC RDIMM module is designed as a compatible replacement for Dell part numbers SNPJ52K5C/64G and AC239379. It targets administrators upgrading server or workstation platforms that require registered error-correcting memory. The single 64GB stick uses a 288-pin DIMM form factor and operates at the standard DDR5 voltage of 1.10V.
Running at 4800 MT/s with a CAS latency of CL40, the module draws 1.10V in line with the DDR5 baseline. Registered buffering reduces electrical load on the memory controller, helping maintain stable thermals inside densely populated chassis. No active cooling is present on the module itself, so airflow across the DIMM slots handles heat dissipation during normal operation.
Under continuous workloads, the registered design and on-die ECC maintain data integrity while the major-brand chipset sustains rated frequency. The 2Rx4 organization (EC8) distributes access across ranks to support consistent throughput. Buyers needing capacities beyond a single 64GB module or systems requiring unbuffered DIMMs should verify platform specifications before ordering.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Dell |
| Model | SNPJ52K5C/64G, AC239379 |
| Capacity | 64GB |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 (EC8) |
| Chipset | Major Brand Chipset |
| Features | SNPJ52K5C/64G, AC239379 |
Power down and unplug the server, open the chassis, align the notch on the 288-pin module with the slot key, press firmly until both ejector tabs click locked, then power on and verify 64GB appears in BIOS or system firmware — the step often missed is confirming the module is fully seated by the audible click of both tabs.
No scheduled maintenance is required for the module itself; keep server air intakes clean so the 1.10V DDR5 memory stays within thermal limits, and replace only if system logs report correctable ECC errors rising or a DIMM fails POST — the registered design and major-brand chipset are built for continuous server operation.
The DDR5 4800 MT/s data rate and CL40 latency set the bandwidth and response ceiling; under sustained load the memory controller will hit its maximum throughput before the 1.10V RDIMM reaches any thermal or voltage limit, so total throughput caps at the rated PC5-38400 speed.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?