NEMIX RAM 64GB DDR4 3200 4Rx4 1.2V 288-PIN ECC LRDIMM server RAM
- DDR4 3200 (PC4 2560…
- 22
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A-Tech
64GB DDR5 4800 ECC registered DIMM with 2Rx4 rank and 1.10V operation for server upgrades
This 64GB DDR5 module operates at 4800MHz with ECC and registered buffering for server and workstation platforms. It replaces Hynix part numbers HMCG94AEBRA103N, HMCG94AEBRA108N, HMCG94AEBRA123N, HMCG94MEBRA102N and HMCG94MEBRA103N. The 2Rx4 organisation and 1.10V voltage match the original specifications. Systems requiring unbuffered memory or non-ECC operation cannot use this module.
The module uses a standard 288-pin DDR5 RDIMM form factor without a heat spreader, relying on chassis airflow for cooling. Registered signalling reduces electrical load on the memory controller, which is essential for multi-module configurations in dense servers. Installers must follow the system manual for correct slot population and channel guidelines to ensure stability. Buyers who need a low-profile heat spreader for restricted clearance should look elsewhere.
The DDR5 4800 interface delivers a peak transfer rate of PC5-38400 with a CAS latency of 40. Bandwidth and latency are fixed by the JEDEC standard for this speed grade; higher throughput requires platform support for faster DDR5 speeds. ECC correction adds reliability for critical workloads but does not increase raw bandwidth. Systems limited to lower DDR5 data rates will downclock the module automatically.
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Hynix HMCG94AEBRA103N HMCG94AEBRA108N HMCG94AEBRA123N HMCG94MEBRA102N HMCG94MEBRA103N |
| Model | A-Tech 64GB DDR5-4800 ECC RDIMM Server RAM Module |
| Capacity | 64GB |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | 40 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx4 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Features | Major Brand DRAM IC Chips |
The module runs at DDR5 4800 MT/s with PC5-38400 bandwidth; actual throughput depends on the server platform, memory controller, and channel configuration.
It requires a standard 288-pin DDR5 DIMM slot; the module has no heat spreader, so it fits in tight server chassis with minimal vertical clearance.
Align the key notch with the slot, press firmly until both retention clips click, and follow the system manual for correct channel population — mixing registered and unbuffered DIMMs is the common error.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?