We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR5 RDIMM circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 64GB DDR5 6400 ECC RDIMM 2Rx4 Hynix HMCG94AHBRA 480N 481N 487N Server RAM

SKU CH-VWJ3-F05RV

64GB DDR5 6400 ECC registered server DIMM with 2Rx4 layout and 1.1V operation

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS Latency32
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity enables large-scale virtualization and data workloads
  • DDR5 6400 speed delivers high bandwidth for compute-intensive tasks
  • ECC RDIMM design detects and corrects memory errors automatically
  • 2Rx4 dual-rank architecture increases memory density per channel
  • 10 V operation reduces power draw in dense server deployments

64GB DDR5 6400 ECC RDIMM Server Module

This 64GB DDR5 6400 ECC registered DIMM is built for servers and workstations that require error-correcting memory at standard voltage. It uses a 288-pin form factor with a 2Rx4 rank configuration and CAS latency of 32. The module operates at 1.10V and is validated as a direct replacement for specific Hynix part numbers.

Replaces Hynix HMCG94AHBRA series modules

It replaces the Hynix HMCG94AHBRA, 480N, 481N and 487N modules when a system calls for that exact DDR5 6400 registered ECC specification. The upgrade is worth it when the platform supports DDR5 6400 RDIMM population rules and the workload needs the higher bandwidth of PC5-51200. Systems limited to lower DDR5 speeds or unbuffered DIMMs will not accept this module.

DDR5 6400 registered ECC platform constraints

The DDR5 6400 RDIMM standard requires a memory controller and BIOS that support 6400 MT/s registered ECC operation at 1.10V. Population limits depend on the specific CPU and motherboard qualification list; exceeding the supported ranks per channel will prevent boot. Mixing with different speeds, ranks or unbuffered DIMMs is not supported by the DDR5 RDIMM specification.

Highlights

  • 64 GB capacity enables large-scale virtualization and data workloads
  • DDR5 6400 speed delivers high bandwidth for compute-intensive tasks
  • ECC RDIMM design detects and corrects memory errors automatically
  • 2Rx4 dual-rank architecture increases memory density per channel
  • 10 V operation reduces power draw in dense server deployments

Specifications

BrandA-Tech
SeriesCompatible Replacement for Hynix HMCG94AHBRA HMCG94AHBRA480N HMCG94AHBRA481N HMCG94AHBRA487N
ModelA-Tech 64GB DDR5-6400 ECC RDIMM Server RAM Module
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS Latency32
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips

Questions about this item

Will the 288-pin DDR5 RDIMM fit my server's memory slots?

This module uses the standard 288-pin DDR5 RDIMM form factor, so it fits any server or workstation slot designed for DDR5 registered DIMMs.

What is the correct way to seat this 2Rx4 registered module, and what step do installers often miss?

Align the notch with the slot key, press firmly until both retention clips click, and verify the motherboard detects the full 64 GB capacity at 6400 MT/s in the BIOS.

Does the 1.10 V DDR5 module need any periodic maintenance or component replacement?

No scheduled maintenance is required; the module has no heat spreader or moving parts, so it runs for the system's lifetime unless a hardware fault occurs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.