We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB 2Rx8 DDR4 2400 ECC RDIMM server RAM

SKU CH-D1RK-89EM5

An 8 GB DDR4 2400 MHz registered ECC DIMM with dual-rank x8 organisation for servers and workstations

  • Capacity8GB
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredRegistered

Capacity 8GB

  • 8GB capacity expands server memory headroom for larger workloads
  • ECC registered design detects and corrects data errors automatically
  • DDR4 2400 speed delivers 19200 MT/s bandwidth for responsive performance
  • Dual rank 2Rx8 organisation increases memory density per channel
  • 20V operation matches standard DDR4 voltage for efficient power use

Server DDR4 module for registered ECC systems

This A-Tech 8GB DDR4 2400 RDIMM is built for servers and workstations that require registered ECC memory. It operates at 2400 MHz with a CAS latency of 17 and runs at the standard 1.2V DDR4 voltage. The dual-rank 2Rx8 organisation uses major-brand chips on a 288-pin DIMM.

Steady throughput under continuous workloads

Registered buffering reduces electrical load on the memory controller, allowing sustained data rates during long compute or virtualisation tasks. ECC corrects single-bit errors on the fly, preventing silent data corruption that can accumulate over hours of operation. The module maintains its rated speed without throttling when installed in compatible multi-channel configurations.

Low-voltage operation keeps thermals modest

At 1.2V the module draws minimal power, contributing little heat inside dense chassis where airflow is limited. Passive cooling via system fans is sufficient; no additional heatsinks or active cooling are required. The registered design also dampens signal noise on the bus, improving stability in fully populated memory channels.

Highlights

  • 8GB capacity expands server memory headroom for larger workloads
  • ECC registered design detects and corrects data errors automatically
  • DDR4 2400 speed delivers 19200 MT/s bandwidth for responsive performance
  • Dual rank 2Rx8 organisation increases memory density per channel
  • 20V operation matches standard DDR4 voltage for efficient power use

Specifications

BrandA-Tech
SeriesA-Tech DDR4 Server Memory RAM
ModelA-Tech 8GB 2Rx8 PC4-2400T-R
Capacity8GB
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How much power does this 1.20V DDR4 2400 module draw when the server runs continuously?

The module operates at the standard DDR4 voltage of 1.20V. Actual power draw depends on the server platform and workload; the module itself has no separate power rating.

What must my system already have to accept this 288-pin ECC RDIMM?

Your server or workstation must support DDR4 registered ECC memory in a 288-pin DIMM slot. Desktop and laptop platforms cannot use this module.

Will this CL17 dual-rank module work alongside slower DDR4 registered sticks already installed?

Mixing modules of different speeds or ranks is not recommended. The system will typically run all memory at the lowest common speed and may require specific population rules.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.