We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green circuit boards with gold contacts and black chips, no heat spreaders

A-Tech

A-Tech 8GB (4x2GB) DDR3 1600MHz PC3-12800 UDIMM Non-ECC 1.5V CL11 240-Pin Desktop RAM Kit

SKU CH-EKX5-9YZG9

A four-module DDR3 desktop kit delivering 8 GB at 1600 MHz with 1.5 V CL11 timing

  • Capacity8GB (4 x 2GB)
  • Type240-Pin PC RAM
  • SpeedDDR3 1600 (PC3 12800)
  • Tested Frequency1600
  • Voltage1.50V
  • ECCNo

Capacity 8GB (4 x 2GB)

Speed DDR3 1600 (PC3 12800)

  • Quad-channel kit multiplies bandwidth with four matched modules
  • DDR3 1600 MHz speed rated at PC3-12800 for responsive desktop performance
  • Low 1.5 V operation keeps power draw modest on compatible platforms
  • CL11 latency timing supports snappy multitasking under everyday workloads
  • 240-pin UDIMM form factor fits standard DDR3 desktop motherboards

A-Tech DDR3 1600 MHz Quad-Channel Kit

This A-Tech kit supplies eight gigabytes of DDR3 desktop memory across four unbuffered DIMMs. Each module runs at 1600 MHz with a CAS latency of 11 and operates at the standard 1.5 V. The 240-pin UDIMMs fit typical DDR3 motherboard slots.

Suits DDR3 Systems Needing Four Modules

Builders restoring or expanding older AMD and Intel platforms that accept four DIMMs will find the quad-channel layout convenient. Systems limited to two slots or requiring registered ECC memory cannot use this kit. Buyers should confirm their board supports 2 GB density per slot.

Deciding Specification — 1600 MHz DDR3 Speed

The tested frequency of 1600 MHz (PC3-12800) determines whether the memory matches the motherboard's rated speed. If the platform only officially supports lower DDR3 grades, the modules will down-clock; if it requires faster grades, this kit will not meet the requirement.

Highlights

  • Quad-channel kit multiplies bandwidth with four matched modules
  • DDR3 1600 MHz speed rated at PC3-12800 for responsive desktop performance
  • Low 1.5 V operation keeps power draw modest on compatible platforms
  • CL11 latency timing supports snappy multitasking under everyday workloads
  • 240-pin UDIMM form factor fits standard DDR3 desktop motherboards

Specifications

BrandA-Tech
SeriesA-Tech DDR3 Desktop Memory RAM
Model8GB Kit (4x2GB) PC3-12800 Non-ECC DIMM
Part NumberNE-SS-0698
Capacity8GB (4 x 2GB)
Type240-Pin PC RAM
SpeedDDR3 1600 (PC3 12800)
Tested Frequency1600
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
Multi-channel KitQuad Channel Kit
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesMajor Brand Chips
Recommend UseAMD & Intel Compatible

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

Will the 240-pin DDR3 modules fit my desktop motherboard?

The kit uses standard 240-pin DDR3 UDIMM modules that install in any desktop board with DDR3 slots. Check your manual for maximum supported speed and capacity per slot.

How do I install the four 2GB sticks correctly for quad-channel operation?

Power off the PC, open the case, and seat each module firmly until the retention clips click. Populate the four slots designated for quad-channel in your motherboard manual; skipping a slot or using the wrong pair breaks multi-channel mode.

What upkeep does this memory need over its lifetime?

No routine maintenance is required. If a module fails, the lifetime warranty covers replacement. Keep the interior dust-free and ensure the CPU cooler clears the low-profile sticks, which have no heat spreaders.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.