A-Tech
A-Tech 8GB DDR3 1600 PC3-12800 240-Pin Desktop RAM Micron MT16JTF1G64AZ-1G6 MT16JTF1G64AZ-1G6D1
8GB DDR3 1600 desktop DIMM, 240-pin unbuffered non-ECC module at 1.5V for AMD and Intel systems
- Capacity8GB
- SpeedDDR3 1600 (PC3 12800)
- Tested Frequency1600
- Voltage1.50V
- ECCNo
- Buffered/RegisteredUnbuffered
- 8GB capacity lets you run more applications smoothly
- DDR3 1600 speed delivers 1600 MT/s data rate
- PC3-12800 rating provides 12800 MB/s peak bandwidth
- 240-pin DIMM fits standard desktop memory slots
- 5V operation matches DDR3 standard voltage
A-Tech 8GB DDR3 1600 DIMM
This A-Tech module provides 8GB of DDR3 desktop memory rated at 1600MHz PC3-12800. It uses a standard 240-pin unbuffered DIMM form factor and runs at 1.5V. The module is built as a compatible replacement for Micron part numbers MT16JTF1G64AZ-1G6, MT16JTF1G64AZ-1G6D1, and MT16JTF1G64AZ-1G6E1.
Suitable for DDR3 desktop upgrades
This memory suits owners of desktop systems that accept DDR3 1600MHz unbuffered non-ECC DIMMs and need a single 8GB module. Builders whose motherboards require ECC registered modules, SODIMM form factors, or a different DDR generation should look at other products.
240-pin DDR3 DIMM form factor
The 240-pin DIMM interface is the single specification that determines fit. Only systems with DDR3 desktop DIMM slots can accept this module; laptops and platforms using other memory types cannot use it.
Highlights
- 8GB capacity lets you run more applications smoothly
- DDR3 1600 speed delivers 1600 MT/s data rate
- PC3-12800 rating provides 12800 MB/s peak bandwidth
- 240-pin DIMM fits standard desktop memory slots
- 5V operation matches DDR3 standard voltage
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3 1600 (PC3 12800) |
| Tested Frequency | 1600 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
Will this 8 GB DDR3 1600 module work in my desktop that uses 240-pin DIMM slots?
Yes, the module is a 240-pin unbuffered DIMM designed for standard desktop motherboards that accept DDR3 memory.
Does the 1.5 V rating match the voltage my motherboard supplies for DDR3?
The module runs at the standard 1.5 V for DDR3, so it is compatible with any desktop board that follows the DDR3 voltage specification.
Can I add this stick alongside my existing 8 GB DDR3 1600 kit to reach 16 GB total?
Provided your motherboard has a free 240-pin slot and supports 8 GB density per slot, the module will operate at 1600 MHz alongside identical-spec memory.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



