We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR3 DIMM with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3 1866MHz ECC RDIMM 1Rx4 Server Memory

SKU CH-G3MW-ETJ8H

8GB DDR3 1866MHz ECC registered DIMM with CL13 latency and 1.5V operation for server workloads

  • Capacity8GB
  • SpeedDDR3 1866 (PC3 14900)
  • CAS LatencyCL13
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 8GB capacity expands server memory headroom
  • DDR3 1866MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • 1Rx4 Samsung chipset ensures signal integrity
  • CL13 latency at 1.5V optimises response time

8GB DDR3 1866MHz ECC RDIMM Server Module

This A-Tech module is an 8GB DDR3 1866MHz ECC Registered DIMM built for server and workstation systems. It uses a 1Rx4 configuration with Samsung chipset and operates at the standard 1.50V voltage. The 240-pin DIMM is a compatible replacement for the Samsung M392B1G70DB0-CMA part.

Suited for registered ECC slots only

This memory fits systems that require DDR3 ECC Registered DIMMs with a 1Rx4 organisation. It will not work in desktop boards that accept only unbuffered non-ECC modules. Buyers needing higher capacities per slot or different rank configurations should verify their platform specifications first.

1Rx4 registered ECC organisation

The single-rank by four-bit arrangement determines compatibility with specific server memory controllers. Systems requiring dual-rank modules or unbuffered ECC will not accept this DIMM. Confirm the 1Rx4 requirement in your hardware manual before ordering.

Highlights

  • 8GB capacity expands server memory headroom
  • DDR3 1866MHz speed accelerates data throughput
  • ECC registered design detects and corrects memory errors
  • 1Rx4 Samsung chipset ensures signal integrity
  • CL13 latency at 1.5V optimises response time

Specifications

BrandA-Tech
SeriesCompatible Replacement for Samsung
ModelM392B1G70DB0-CMA
Capacity8GB
SpeedDDR3 1866 (PC3 14900)
CAS LatencyCL13
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetSamsung Chipset
FeaturesM392B1G70DB0-CMA

Questions about this item

Will this DDR3 1866 MHz ECC RDIMM operate at its rated speed alongside slower registered DDR3 modules already installed?

The module runs at 1866 MHz with CL13 timing at 1.5 V; the system memory controller will set a common speed for all populated slots.

How can I verify the 1Rx4 registered ECC module is recognised and functioning after installation?

Check the BIOS memory summary for 8 GB at 1866 MHz, ECC enabled and registered status, then run a memory diagnostic such as MemTest86.

Does the 240-pin DDR3 DIMM ship alone or with any accessories or tools?

The box contains the single 8 GB DDR3 1866 MHz ECC RDIMM module only; no cables, brackets or tools are included.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.