We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR3L 1600 ECC RDIMM 1Rx4 1.35V for Kingston D1G72K111S KTD-PE316S/8G server RAM

SKU CH-Y284-ZM0ZP

An 8 GB DDR3L 1600 ECC registered DIMM with 1.35 V low-voltage operation for server upgrades

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredRegistered
  • ECC protection prevents data errors with registered DDR3L design
  • Low 1.35V operation cuts server power draw
  • 1600 MHz CL11 speed handles heavy workloads
  • 1Rx4 8GB density fits 240-pin DDR3 slots
  • Tested replacement for Kingston D1G72K111S and KTD-PE316S/8G

8GB DDR3L 1600 ECC RDIMM Server Memory

This 8GB registered ECC module runs at DDR3L 1600 with a CL11 latency and 1.35V operation. It uses a 1Rx4 organisation and major-brand chips on a 240-pin DIMM. The module targets administrators upgrading or repairing compatible server and workstation platforms that require registered ECC memory.

DDR3L 1600 Registered ECC Interface Limits

The DDR3L 1600 standard tops out at 12800 MB/s theoretical bandwidth per module. Registered buffering adds one clock cycle of latency versus unbuffered DIMMs, and the 1.35V low-voltage spec means the module will not operate at 1.5V DDR3 voltages. ECC function requires a chipset and BIOS that actively support error correction; without that support the extra parity bits are ignored.

Straightforward DIMM Installation

Installation is a matter of aligning the 240-pin key and pressing the module into the slot until the retention clips engage. The most common issue is purchasing registered ECC memory for a platform that only accepts unbuffered non-ECC DIMMs, which prevents the system from posting. Verifying the motherboard qualified-vendor list against the listed Kingston part numbers avoids that mismatch.

Highlights

  • ECC protection prevents data errors with registered DDR3L design
  • Low 1.35V operation cuts server power draw
  • 1600 MHz CL11 speed handles heavy workloads
  • 1Rx4 8GB density fits 240-pin DDR3 slots
  • Tested replacement for Kingston D1G72K111S and KTD-PE316S/8G

Specifications

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

Should I choose the 8GB module or the 32GB kit for my server?

This listing is for a single 8GB module; the 32GB reference (KTD-PE316SK4/32G) is a four-module kit. Buy one module per slot you want to populate.

What does DDR3L 1600 mean for real-world throughput in my system?

DDR3L 1600 runs at 1600 MHz with CL11 latency, so each channel moves data at the PC3L-12800 rate; actual throughput depends on your platform's memory controller and channel count.

Will the 240-pin registered ECC interface work in my DDR3L server board?

The module is a 240-pin DDR3L RDIMM with ECC and 1.35 V operation; it fits DDR3L RDIMM slots that support registered ECC — verify your system's qualified-vendor list before installing.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.