We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 240-pin DDR3L UDIMM module with black chips and gold contacts

A-Tech

A-Tech 8GB DDR3L 1600 ECC UDIMM 2Rx8 for Micron MT18KDF1G72AZ-1G6 Server Memory

SKU CH-364T-JA0GJ

An 8 GB DDR3L 1600 ECC UDIMM module at 1.35 V for Micron server systems

  • Capacity8GB
  • SpeedDDR3L 1600 (PC3L 12800)
  • CAS LatencyCL11
  • Voltage1.35V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity adds server headroom for heavier workloads
  • DDR3L 1600MHz speed accelerates data throughput
  • ECC UDIMM protects data integrity in critical tasks
  • 35V low voltage reduces power draw and heat
  • 2Rx8 dual-rank design optimises memory density per slot

8 GB DDR3L ECC UDIMM for Micron Replacement

This 8 GB DDR3L module runs at 1600 MHz with CL11 latency and 1.35 V operation. It is built as an unbuffered ECC UDIMM using a 2Rx8 organisation. The stick serves as a direct replacement for Micron MT18KDF1G72AZ-1G6, MT18KSF1G72AZ-1G6 and MT18KSF1G72AZ-1G6E1 parts in server and workstation systems.

Verify DDR3L 240-pin UDIMM support

Confirm that your motherboard accepts DDR3L 1.35 V unbuffered ECC DIMMs in the 240-pin form factor. Systems requiring registered or fully buffered memory cannot use this module. Check the maximum supported capacity per slot and the total number of available slots before ordering.

Major-brand chips on a standard 240-pin DIMM

The module uses major-brand chips assembled on a conventional 240-pin PCB. The 2Rx8 layout presents two ranks to the memory controller, which may affect maximum population rules on some platforms. The 1.35 V low-voltage design reduces power draw compared with standard 1.5 V DDR3.

Highlights

  • 8GB capacity adds server headroom for heavier workloads
  • DDR3L 1600MHz speed accelerates data throughput
  • ECC UDIMM protects data integrity in critical tasks
  • 35V low voltage reduces power draw and heat
  • 2Rx8 dual-rank design optimises memory density per slot

Specifications

BrandA-Tech
Capacity8GB
SpeedDDR3L 1600 (PC3L 12800)
CAS LatencyCL11
Voltage1.35V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

What comes in the box and what must I buy separately?

The package contains one 8GB DDR3L 1600 ECC UDIMM module. No extra cables, brackets or software are included.

How do I choose between the Micron part numbers listed?

MT18KDF1G72AZ-1G6, MT18KSF1G72AZ-1G6 and MT18KSF1G72AZ-1G6E1 are all matched by this single 8GB 2Rx8 module. Pick the one printed on your existing stickers.

What does the PC3L-12800 rating mean once the module is installed?

It confirms the stick runs at DDR3L 1600 with a CAS latency of 11 at 1.35V, delivering the rated throughput for compatible server boards.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.