A-Tech
A-Tech 8GB DDR3L 1600 PC3L-12800 240-pin Desktop RAM for Micron MT16KTF1G64AZ-1G6/1G6E1/1G6P1
An 8 GB DDR3L desktop module running at 1600 MHz with 1.35 V low-voltage operation on a 240-pin unbuffered DIMM
- Capacity8GB
- SpeedDDR3L 1600 (PC3L 12800)
- Tested Frequency1600
- Voltage1.35V
- ECCNo
- Buffered/RegisteredUnbuffered
- 8GB capacity adds headroom for multitasking
- DDR3L 1600MHz speed accelerates data throughput
- 35V low voltage reduces power draw
- 240-pin DIMM fits standard desktop slots
- Tested replacement for Micron MT16KTF1G64AZ modules
8GB DDR3L Desktop Memory Upgrade
This A-Tech module delivers 8GB of DDR3L memory at 1600 MHz with a 240-pin DIMM form factor. It operates at 1.35V and uses an unbuffered, non-ECC design tested for broad AMD and Intel desktop compatibility.
Suited for owners of Micron MT16KTF1G64AZ modules
Builders replacing a failed Micron MT16KTF1G64AZ-1G6, MT16KTF1G64AZ-1G6E1 or MT16KTF1G64AZ-1G6P1 stick can install this directly. Systems that require ECC, registered DIMMs or a different DDR generation should select another part.
1.35V DDR3L voltage decides fit
The module runs at 1.35V low voltage rather than standard DDR3 voltage, so the motherboard must support DDR3L operation. Verify this specification in your system documentation before purchasing.
Highlights
- 8GB capacity adds headroom for multitasking
- DDR3L 1600MHz speed accelerates data throughput
- 35V low voltage reduces power draw
- 240-pin DIMM fits standard desktop slots
- Tested replacement for Micron MT16KTF1G64AZ modules
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR3L 1600 (PC3L 12800) |
| Tested Frequency | 1600 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
Will the 1.35V DDR3L module need any voltage adjustment when I install it in a standard desktop board?
The stick runs at 1.35V, the standard DDR3L voltage, so most modern desktops will detect and apply the correct setting automatically.
What speed ceiling will I hit first if I keep the 1600MHz DIMM under constant load?
The module is rated for 1600MHz PC3L-12800; sustained workloads will be limited by that JEDEC speed rather than any higher overclock profile.
How much extra heat or fan noise should I expect from the 8GB unbuffered DIMM running all day?
DDR3L at 1.35V generates modest heat; the unbuffered 240-pin DIMM adds no active cooling, so case airflow normally handles it without noticeable noise increase.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



