We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular DDR4 DIMM with black chips, no heat spreader, 288 pins

A-Tech

A-Tech 8GB DDR4 2133 CL15 Replacement for Corsair CMK16GX4M2A2133C13 Desktop RAM

SKU CH-V9MS-7P26X

An 8 GB DDR4 2133 MHz desktop DIMM rated CL15 at 1.2 V, built as a compatible replacement for the Corsair CMK16GX4M2A2133C13 kit

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • Tested Frequency2133
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCNo
  • 8GB capacity boosts multitasking headroom for desktop workloads
  • DDR4 2133MHz speed matches PC4-17000 spec for drop-in upgrades
  • CL15 latency at 1.20V delivers stable standard-voltage operation
  • Unbuffered 288-pin DIMM fits mainstream desktop motherboard slots
  • Quality-tested modules with lifetime warranty ensure long-term reliability

Replacement for Corsair CMK16GX4M2A2133C13

This A-Tech desktop memory module delivers 8GB of DDR4 2133 speed with CL15 latency. It is an unbuffered, non-ECC DIMM built to match the original Corsair part number. The 1.20V voltage aligns with standard DDR4 specifications. System builders can use it as a direct drop-in upgrade for compatible platforms.

Suitable for DDR4 desktop upgrades needing 8GB

Users replacing a failed Corsair CMK16GX4M2A2133C13 stick or adding capacity to a board that supports DDR4 2133 will find this module appropriate. Systems requiring ECC, registered memory, lower latency than CL15, or a different DDR generation should look elsewhere. Verify motherboard qualification lists before ordering.

CL15 CAS latency at DDR4 2133 sets the timing

The module operates at CL15 latency with a tested frequency of 2133MHz and PC4-17000 rating. This timing figure determines whether the memory meets your board's supported latency window. Match this value against your system specifications to confirm compatibility.

Highlights

  • 8GB capacity boosts multitasking headroom for desktop workloads
  • DDR4 2133MHz speed matches PC4-17000 spec for drop-in upgrades
  • CL15 latency at 1.20V delivers stable standard-voltage operation
  • Unbuffered 288-pin DIMM fits mainstream desktop motherboard slots
  • Quality-tested modules with lifetime warranty ensure long-term reliability

Specifications

BrandA-Tech
SeriesCompatible Replacement for Corsair
ModelCMK16GX4M2A2133C13
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
Tested Frequency2133
CAS LatencyCL15
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chipset
Heat SpreaderNo
FeaturesCMK16GX4M2A2133C13
Recommend UseCompatible Replacement for Corsair CMK16GX4M2A2133C13

Questions about this item

Should I pick the single 8 GB module or the 16 GB kit that the Corsair part number represents?

This listing is a single 8 GB DIMM; the Corsair CMK16GX4M2A2133C13 is a 16 GB kit containing two 8 GB sticks, so order two of these if you need the full kit capacity.

Will the CL15 timing at 2133 MHz actually run at that speed in my desktop?

The module is rated DDR4 2133 CL15 at 1.20 V; most motherboards will default to JEDEC 2133 MHz with CL15 automatically, and you can confirm the profile in BIOS if needed.

Does the 288-pin DDR4 DIMM fit the standard desktop slot and what bandwidth does PC4-17000 provide?

Yes, it uses the standard 288-pin DDR4 DIMM form factor, and PC4-17000 indicates a peak transfer rate of 17 GB/s on a compatible platform.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.