We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech 8GB DDR4 2133MHz ECC UDIMM 2Rx8 for IBM-Lenovo 46W0812 46W0813 4X70G88316 4X70G88331 4X70K14184

SKU CH-182Y-N2VCN

8GB DDR4 2133MHz ECC UDIMM module with CL15 timing, 1.2V operation and 2Rx8 rank for compatible IBM-Lenovo servers

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 8GB capacity expands server memory headroom for larger workloads
  • DDR4 2133MHz speed delivers PC4-17000 bandwidth for responsive data access
  • ECC UDIMM design detects and corrects single-bit errors automatically
  • 2Rx8 dual-rank organisation increases memory density per DIMM slot
  • 20V operation matches DDR4 standard voltage for efficient power use

8GB DDR4 ECC UDIMM for IBM-Lenovo servers

This 8 GB DDR4 module runs at 2133 MHz with CL15 latency and 1.20 V operation. It is built as an unbuffered ECC UDIMM using a 2Rx8 organisation and major-brand chips. The part replaces IBM-Lenovo numbers 46W0812, 46W0813, 4X70G88316, 4X70G88331 and 4X70K14184. It targets administrators who need validated ECC memory for compatible ThinkSystem or System x platforms.

288-pin DDR4 DIMM fits standard unbuffered ECC slots

The module uses the standard 288-pin DDR4 DIMM form factor and requires a motherboard that supports unbuffered ECC UDIMMs at the PC4-17000 speed grade. It installs directly into an available DIMM slot without registered or load-reduced signalling. Systems that require registered RDIMMs or LRDIMMs cannot use this module, and platforms limited to non-ECC memory will not benefit from the error-correction capability.

Sustained server workloads with ECC protection

Under continuous load the ECC function detects and corrects single-bit errors to maintain data integrity across long-running tasks. The 1.20 V DDR4 standard voltage keeps power draw consistent during extended operation. Modules are tested for reliability before shipping. Buyers who need higher capacities per slot, registered buffering or faster DDR4 speeds should verify their platform specifications before ordering.

Highlights

  • 8GB capacity expands server memory headroom for larger workloads
  • DDR4 2133MHz speed delivers PC4-17000 bandwidth for responsive data access
  • ECC UDIMM design detects and corrects single-bit errors automatically
  • 2Rx8 dual-rank organisation increases memory density per DIMM slot
  • 20V operation matches DDR4 standard voltage for efficient power use

Specifications

BrandA-Tech
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
FeaturesMajor Brand Chips

Questions about this item

Does the 2Rx8 dual-rank layout limit how many modules I can populate per channel?

Each module is a 2Rx8 DDR4 2133 ECC UDIMM; the maximum modules per channel depends on your server or workstation memory-controller specification, so check the system manual before filling every slot.

What thermal load should I expect from the 1.20 V DDR4 2133 modules during continuous operation?

Standard DDR4 1.20 V ECC UDIMMs run cool under sustained load; adequate chassis airflow is normally sufficient and no extra cooling is required for the memory itself.

Which motherboard feature must already be present for this ECC UDIMM to function?

The board must support DDR4 ECC unbuffered DIMMs at 2133 MHz with a 288-pin slot; without that native ECC UDIMM capability the module will not operate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.