BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.0027816BTC
In stock
A-Tech
A-Tech 8GB DDR4 2400MHz CL17 260-Pin SODIMM 2Rx8 Kingston HX424S14IBK2/16 KVR24S17D8/8 Laptop RAM
An 8 GB DDR4 2400 MHz SO-DIMM with CL17 latency and 1.2 V operation for laptop memory upgrades
- Capacity8GB
- Type260-Pin DDR4 SO-DIMM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Voltage1.20V
- ECCNo
- Boosts multitasking with 8GB DDR4 2400MHz capacity
- Speeds up loading via PC4-19200 bandwidth
- Fits standard laptops using 260-pin SODIMM slot
- Runs efficiently at 1.2V DDR4 voltage
- Tested for reliable AMD and Intel compatibility
8GB DDR4 SODIMM for Laptop Upgrades
This 8GB DDR4 2400MHz SODIMM module fits 260-pin slots in laptops, notebooks and all-in-one systems. It runs at CL17 latency with a standard 1.20V supply and uses unbuffered, non-ECC architecture. The stick is built with major-brand chips and matches Kingston HX424S14IBK2/16 and KVR24S17D8/8 specifications for direct replacement.
Tool-free slot installation with common pitfalls
Installation requires opening the memory compartment, aligning the notch on the 260-pin edge connector, and pressing firmly until the side clips latch. The most frequent issues are inserting the module at an angle so the clips do not engage, or purchasing a single 8GB stick when the system requires matched pairs for dual-channel operation. Verify your platform supports DDR4 2400 before ordering.
Steady throughput under sustained workloads
Under continuous load the module maintains its rated 2400MHz speed at CL17 timings without throttling, thanks to standard-voltage DDR4 operation and quality IC selection. The 2Rx8 organisation helps sustain bandwidth during long rendering, compilation or virtualisation sessions. Systems limited to lower memory speeds will down-clock the module automatically, reducing peak throughput.
Highlights
- Boosts multitasking with 8GB DDR4 2400MHz capacity
- Speeds up loading via PC4-19200 bandwidth
- Fits standard laptops using 260-pin SODIMM slot
- Runs efficiently at 1.2V DDR4 voltage
- Tested for reliable AMD and Intel compatibility
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Features | Major Brand Chips |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
How can I confirm the 8GB DDR4 2400MHz SODIMM is running at CL17 1.20V after installation?
Open Task Manager or CPU-Z and check that the module reports 2400MHz speed, CL17 latency and 1.20V operating voltage.
What comes in the package and do I need any extra parts to install this 260-pin SODIMM?
The box contains one 8GB 260-pin DDR4 SODIMM module; no additional cables, brackets or tools are required for a standard laptop memory slot.
Should I choose this 8GB CL17 version or a different capacity for my Kingston HX424S14IBK2/16 replacement?
This 8GB CL17 2400MHz module matches the Kingston HX424S14IBK2/16 and KVR24S17D8/8 specifications; select it when your system needs a single 8GB stick.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
