We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
A green rectangular circuit board with gold edge connectors and black memory chips

A-Tech

A-Tech 8GB DDR4 2933MHz CL21 Dell AA101830 SNPJ69DFC/8G Desktop RAM

SKU CH-9FCG-1X0AP

An 8 GB DDR4 DIMM running at 2933 MHz with CL21 latency and 1.2 V operation, tested for Dell AA101830 and SNPJ69DFC/8G systems

  • Capacity8GB
  • SpeedDDR4 2933 (PC4 23400)
  • Tested Frequency2933
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo
  • 8GB DDR4 capacity expands multitasking headroom for everyday workloads
  • 2933 MHz rated speed keeps data flowing at PC4-23400 bandwidth
  • CL21 latency at 1.20 V balances responsiveness with standard power draw
  • 288-pin unbuffered DIMM fits compatible Dell AA101830 and SNPJ69DFC/8G systems
  • Major-brand chipset tested for dependable desktop operation

8GB DDR4 2933MHz Desktop Module

This 8GB DDR4 DIMM runs at 2933MHz with CL21 latency and 1.20V operation. It is an unbuffered non-ECC module built with major brand chips for AMD and Intel platforms. The single 288-pin stick replaces Dell part numbers AA101830 and SNPJ69DFC/8G.

Standard Voltage Low Heat Operation

At 1.2V the module draws minimal power and generates little heat inside a desktop chassis. No active cooling is required and the memory runs silently during typical workloads. The low voltage also reduces stress on the motherboard power delivery.

288-Pin DIMM Plug and Play Upgrade

The standard 288-pin form factor fits any desktop DDR4 slot without adapters. Major brand chipsets ensure consistent quality and reliable boot behaviour. Simply insert the module to add 8GB of capacity for everyday multitasking.

Highlights

  • 8GB DDR4 capacity expands multitasking headroom for everyday workloads
  • 2933 MHz rated speed keeps data flowing at PC4-23400 bandwidth
  • CL21 latency at 1.20 V balances responsiveness with standard power draw
  • 288-pin unbuffered DIMM fits compatible Dell AA101830 and SNPJ69DFC/8G systems
  • Major-brand chipset tested for dependable desktop operation

Specifications

BrandA-Tech
Capacity8GB
SpeedDDR4 2933 (PC4 23400)
Tested Frequency2933
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand Chips
FeaturesMajor Brand Chipset
Recommend UseAMD & Intel Compatible

Questions about this item

How do I install this 288-pin DDR4 DIMM and what step do people often miss?

Align the notch on the module with the slot key, press down firmly until both side clips click into place, and ensure the system is fully powered off and unplugged before starting.

What maintenance or replacement will this 8GB DDR4 2933MHz CL21 module need over time?

No routine maintenance is required; keep the interior free of dust and reseat the module only if the system fails to recognise it after a move or upgrade.

What limit appears first when this 1.20V DDR4 memory runs under sustained heavy workloads?

The CL21 latency at 2933MHz sets the throughput ceiling, so sustained bandwidth maxes out at the rated PC4-23400 specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.