Micron Technology, Inc.
Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
$28.99
0.00037452BTC
In stock
A-Tech
A-Tech 8GB DDR4 3200MHz CL22 1Rx16 desktop RAM
8GB DDR4 desktop memory running at 3200MHz with CL22 latency and 1.2V operation
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- Tested Frequency3200
- CAS LatencyCL22
- Voltage1.20V
- ECCNo
- 8GB capacity adds multitasking headroom for everyday workloads
- DDR4 3200MHz speed matches PC4-25600 bandwidth rating
- CL22 latency at 1.20V standard DDR4 voltage
- 288-pin unbuffered DIMM fits mainstream desktop slots
- Tested with major-brand chips for reliable operation
Compatible DDR4 3200 desktop module
This A-Tech module delivers 8 GB of DDR4 memory at 3200 MHz with CL22 latency and 1.20 V operation. It uses a 288-pin unbuffered DIMM form factor built with major-brand chips. The stick is validated as a direct replacement for Kingston KVR32N22S6/8 and KCP432NS6/8 parts.
Suits standard DDR4 desktops.
Builders upgrading a mainstream desktop that accepts non-ECC UDIMM memory can use this module. Systems that require ECC, registered DIMMs, or a different voltage should select a different part. The single-rank 1Rx16 organisation works with most consumer AMD and Intel platforms that support DDR4 3200.
3200 MHz CL22 at 1.20 V
The tested speed of 3200 MHz (PC4-25600) with CAS latency 22 at the standard 1.20 V determines whether this module matches the motherboard's supported profile. If the board only runs lower frequencies or tighter timings, the memory will down-clock accordingly.
Highlights
- 8GB capacity adds multitasking headroom for everyday workloads
- DDR4 3200MHz speed matches PC4-25600 bandwidth rating
- CL22 latency at 1.20V standard DDR4 voltage
- 288-pin unbuffered DIMM fits mainstream desktop slots
- Tested with major-brand chips for reliable operation
Specifications
| Brand | A-Tech |
|---|---|
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| Tested Frequency | 3200 |
| CAS Latency | CL22 |
| Voltage | 1.20V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major Brand Chips |
| Features | Major Brand Chipset |
| Recommend Use | AMD & Intel Compatible |
Questions about this item
Does the DDR4 3200 CL22 rating cap real-world throughput at the JEDEC 3200 MT/s ceiling?
Yes, the stick is a JEDEC-standard DDR4 3200 module rated at CL22 1.20 V, so it will not exceed the 3200 MT/s data rate unless the motherboard manually raises frequency or tightens timings.
Will the 288-pin DIMM fit a standard desktop motherboard slot without clearance issues?
The module uses the regular 288-pin UDIMM form factor and a low-profile green PCB, so it fits any desktop DDR4 slot that is not blocked by an oversized CPU cooler.
Is there a specific orientation step that first-time builders often miss when seating this RAM?
Align the off-centre notch on the gold edge with the key in the slot, press straight down until both retention clips click, and verify the clips fully lock — partial seating is the most common cause of a no-post boot.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kingston Technology Corp.
Kingston Technology Corp. KTD-DM8400A/512 512MB DDR2 desktop RAM
- 512MB
- CL4
$12.99
0.00016782BTC
In stock
