SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00500262BTC
In stock
A-Tech
A-Tech 8GB DDR5 4800MHz CL40 1.10V 262-Pin SODIMM Laptop RAM
An 8 GB DDR5 laptop module running at 4800 MHz with CL40 latency and 1.10 V operation
- Capacity8GB
- Type262-Pin DDR5 SO-DIMM
- SpeedDDR5 4800 (PC5 38400)
- CAS LatencyCL40
- Voltage1.10V
- ECCNo
- 8 GB capacity lets you run more applications simultaneously
- DDR5 4800 MHz speed delivers high data transfer rates
- CL40 latency timing supports responsive system operation
- 10 V DDR5 standard voltage reduces power draw
- 262-pin SO-DIMM form factor fits compatible laptop memory slots
DDR5 4800 SODIMM for laptop upgrade
This 8 GB DDR5 module runs at 4800 MHz with CL40 latency and 1.10 V operation. It uses the standard 262-pin SO-DIMM form factor for laptops, notebooks and all-in-one systems. The unbuffered, non-ECC design matches the PC5-38400 specification. Buyers who need 16 GB or higher single-module capacity should look elsewhere.
Thermals noise and power at stock settings
DDR5 at 1.10 V draws less power than previous generations, reducing heat inside compact chassis. No heat spreader is fitted, so the module relies on the system's existing airflow. Silent operation is assured because there are no moving parts. Systems with constrained cooling headroom benefit from the lower voltage.
Compatible replacement for Corsair part numbers
The module is validated as a direct replacement for Corsair CMSX8GX5M1A4800C40 and CMSX16GX5M2A4800C40 kits. Rigorous testing ensures reliable performance at the rated speed and timings. Lifetime warranty and US-based technical support are included with every order. No additional software or accessories are bundled.
Highlights
- 8 GB capacity lets you run more applications simultaneously
- DDR5 4800 MHz speed delivers high data transfer rates
- CL40 latency timing supports responsive system operation
- 10 V DDR5 standard voltage reduces power draw
- 262-pin SO-DIMM form factor fits compatible laptop memory slots
Specifications
| Brand | A-Tech |
|---|---|
| Series | Compatible Replacement for Corsair |
| Model | CMSX8GX5M1A4800C40, CMSX16GX5M2A4800C40 |
| Capacity | 8GB |
| Type | 262-Pin DDR5 SO-DIMM |
| Speed | DDR5 4800 (PC5 38400) |
| CAS Latency | CL40 |
| Voltage | 1.10V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | CMSX8GX5M1A4800C40, CMSX16GX5M2A4800C40 |
| Recommend Use | Compatible Replacement for Corsair CMSX8GX5M1A4800C40, CMSX16GX5M2A4800C40 |
Questions about this item
How do I install the 262-pin DDR5 SODIMM in my laptop, and what step do people often miss?
Power off the laptop, disconnect the battery if accessible, open the memory compartment, align the notch on the 262-pin module with the slot key, insert at a slight angle, then press down firmly until both side clips click — the step many miss is not seating it fully so the clips engage.
What maintenance or replacement will this 8GB DDR5 module need over time?
No routine maintenance is required for this unbuffered non-ECC DDR5 SODIMM; if a memory error appears later, the module itself would be replaced rather than serviced.
What limit appears first when this CL40 4800MHz DDR5 runs under sustained load?
The CAS latency of CL40 at 4800MHz sets the timing boundary, and the fixed 1.10V operating voltage caps headroom before thermal or power limits become a factor.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
