We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green printed circuit board with black memory chips, 288-pin DDR5 DIMM, no heat spreader

A-Tech

A-Tech 8GB DDR5 5600 Desktop RAM 1Rx16

SKU CH-KF9B-4BXVM

An 8 GB DDR5 desktop module running at 5600 MHz with CL40 latency and 1.10 V operation

  • Capacity8GB
  • SpeedDDR5 5600 (PC5 44800)
  • Tested Frequency5600
  • CAS Latency40
  • Voltage1.10V
  • ECCNo
  • 8GB capacity lets you handle larger workloads
  • 5600MHz DDR5 speed accelerates data throughput
  • 10V standard voltage reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • CAS latency 40 supports responsive operation

A-Tech 8GB DDR5 5600 Desktop RAM Module

This 8GB DDR5 desktop memory module runs at 5600MHz with a CAS latency of 40 and operates at 1.1V. It is an unbuffered, non-ECC DIMM built with major brand DRAM IC chips. The module is designed as a compatible replacement for the Kingston KGDGT0-HYA-I part number.

Replacement for Kingston KGDGT0-HYA-I

Using this module as a direct replacement restores the original memory configuration specified by the Kingston part number. The 1Rx16 rank organisation and 1.10V standard voltage match the factory specifications for compatible systems. No additional software or accessories are included with the memory stick itself.

Verify DDR5 motherboard support

Before ordering, confirm that your desktop motherboard supports DDR5 memory and has a free 288-pin DIMM slot. Check the system manual for the correct memory seating and channel guidelines to ensure proper installation. The green and black PCB carries no heat spreader, so ensure adequate case airflow around the memory area.

Highlights

  • 8GB capacity lets you handle larger workloads
  • 5600MHz DDR5 speed accelerates data throughput
  • 10V standard voltage reduces power draw
  • 288-pin DIMM fits standard desktop slots
  • CAS latency 40 supports responsive operation

Specifications

BrandA-Tech
SeriesCompatible Replacement for Kingston KGDGT0-HYA-I
ModelA-Tech 8GB DDR5-5600 Desktop RAM Module
Capacity8GB
SpeedDDR5 5600 (PC5 44800)
Tested Frequency5600
CAS Latency40
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor Brand DRAM IC Chips
ColorGreen/Black
Heat SpreaderNo
FeaturesMajor Brand DRAM IC Chips
Recommend UseCompatible Replacement for Kingston KGDGT0-HYA-I

Questions about this item

Will the 288-pin DDR5 module need any cleaning or part replacement after installation?

No routine cleaning or part replacement is required for the 288-pin DDR5 module; it is a solid-state component with no moving parts and no heat spreader to maintain.

What limit appears first during sustained use at the rated 5600 MT/s speed?

The CAS latency of 40 cycles at 5600 MT/s is the primary timing constraint that governs sustained throughput.

How much power does the 1.10 V module draw when running all day?

The module operates at the DDR5 standard voltage of 1.10 V with no heat spreader, so power draw stays low and heat output remains minimal during continuous operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.