We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold edge connectors

A-Tech

A-Tech Supermicro Certified MEM-DR340L-SL01-ER16 4GB DDR3 1600MHz ECC RDIMM Server RAM

SKU CH-X92Z-18S8A

4GB DDR3 1600MHz ECC registered DIMM with Samsung chips, CL11 latency and 1.5V operation for Supermicro servers

  • Capacity4GB
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.50V
  • ECCYes
  • Buffered/RegisteredRegistered
  • Supermicro certified for guaranteed server compatibility
  • Samsung DDR3 1600 MHz chipset delivers reliable data integrity
  • ECC registered design corrects errors in critical workloads
  • 1Rx4 single rank optimises signal stability at CL11
  • 5 V standard voltage ensures broad platform support

4GB DDR3 ECC RDIMM Server Memory

This 4GB DDR3 1600MHz ECC Registered DIMM uses Samsung chips and carries Supermicro certification. It operates at 1.50V with CL11 latency and a 1Rx4 single-rank layout on a 240-pin form factor. The module is tested for dependable operation in compatible server platforms.

Suited for ECC Registered DDR3 Slots

This module fits systems that require DDR3 ECC Registered memory at 1600MHz with a 240-pin RDIMM interface. It will not work in platforms that only accept unbuffered UDIMMs, non-ECC memory, or a different DDR generation. Buyers needing higher capacity per module or a different voltage should look elsewhere.

Supermicro Certified MEM-DR340L-SL01-ER16

The Supermicro certification on part MEM-DR340L-SL01-ER16 confirms validated compatibility with supported Supermicro server platforms. This designation is the primary indicator that the module meets the vendor's qualified hardware list for those systems.

Highlights

  • Supermicro certified for guaranteed server compatibility
  • Samsung DDR3 1600 MHz chipset delivers reliable data integrity
  • ECC registered design corrects errors in critical workloads
  • 1Rx4 single rank optimises signal stability at CL11
  • 5 V standard voltage ensures broad platform support

Specifications

BrandSuperMicro
SeriesSupermicro Certified
ModelMEM-DR340L-SL01-ER16
Capacity4GB
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.50V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetSamsung Chipset
FeaturesSupermicro Certified MEM-DR340L-SL01-ER16 (M393B5270DH0-CK0)

Questions about this item

Will this 1Rx4 registered DDR3 1600 module run alongside existing 2Rx4 sticks in a Supermicro server?

Mixing single-rank 1Rx4 and dual-rank 2Rx4 RDIMMs is possible on many Supermicro platforms, but the memory controller will operate all channels at the lowest common speed and rank configuration; check your motherboard manual for supported population rules.

How can I confirm the module is detected at PC3-12800 CL11 after installation?

Enter the BIOS or use a hardware-info utility; the module should report 4 GB capacity, DDR3 1600 MT/s, registered ECC, 1.5 V and CAS latency 11.

Does the box contain only the 240-pin RDIMM or are there extra brackets or cables?

The package includes the single 4 GB 240-pin RDIMM module only; no brackets, cables or additional accessories are supplied.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.