We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact black laser engraver, pre-assembled, 130x130mm work area

ACMER

ACMER S1 3.5W Laser Engraver 130x130mm

SKU CH-CAND-96A6N

Portable 3.5 W laser engraver with 130 × 130 mm work area and 10 000 mm/min speed

  • TechnologyRed and blue laser
  • Max Working Speed10000mm/min
  • ColorBlack
  • FeaturesMini and portable
  • Package ContentsThe whole package, no need to disassemble and install
  • Dimensions8.27*10.24*1.6in
  • Ready to engrave straight from the box
  • 5 W laser cuts wood, metal, acrylic and leather
  • 130 × 130 mm work area fits multiple small pieces
  • Weighs 1.8 kg for easy transport anywhere
  • 10 000 mm/min top speed finishes projects fast

Portable Laser Engraver For Hobbyists

The ACMER S1 is a Class 4 laser engraver rated at 3.5 W output using red and blue laser technology. It weighs 1.8 kg and measures 8.27 by 10.24 by 1.6 inches, making it easy to carry to a workshop or outdoor setting. The 130 by 130 mm working area suits small projects such as jewellery, phone cases or leather patches. It is aimed at beginners and hobbyists who want a ready-to-use machine without a large footprint.

Pre-Assembled Package With Safety Switches

The unit ships fully assembled and factory-tested, so there is no frame construction or alignment required before the first job. Limit switches on the X and Y axes provide automatic homing and help prevent over-travel during operation. The package contains the complete system with no extra parts to source, letting the operator start engraving immediately after unpacking.

130 Mm Square Work Area And 10000 Mm/Min Speed

The 130 by 130 mm bed accommodates multiple small items in a single pass, and the integrated laser scale aids precise placement. Maximum engraving speed reaches 10000 mm/min, which is sufficient for detailed artwork on wood, acrylic, leather and coated metals. The 3.5 W diode cannot cut thick stock or bare metal efficiently, so users needing deeper cuts or larger formats will need a higher-power machine.

Highlights

  • Ready to engrave straight from the box
  • 5 W laser cuts wood, metal, acrylic and leather
  • 130 × 130 mm work area fits multiple small pieces
  • Weighs 1.8 kg for easy transport anywhere
  • 10 000 mm/min top speed finishes projects fast

Specifications

BrandACMER
Series2.5W
ModelACMER-S1-3.5W
TechnologyRed and blue laser
Max Working Speed10000mm/min
ColorBlack
FeaturesMini and portable
Package ContentsThe whole package, no need to disassemble and install
Dimensions8.27*10.24*1.6in
Weight1.8kg

Questions about this item

How often will the 3.5 W laser diode need replacement under regular use?

The diode is rated for thousands of hours; typical users replace it only when engraving depth noticeably drops after extended sessions.

What limits continuous operation on the 130 × 130 mm bed?

The 3.5 W output and 10 000 mm/min top speed mean heat buildup in the diode housing becomes the bottleneck before the motion system does.

How loud and hot does the unit get during an all-day engraving run?

A small internal fan keeps the 1.8 kg chassis warm but not hot, and noise stays at a low hum comparable to a quiet laptop cooler.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.