We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal duplicator with nine horizontal SATA drive slots and a four-button control panel

Acumen Disc

Acumen Disc H09-SATA150 1-to-9 SATA Duplicator 150MB/s

SKU CH-4CD9-W5C8C

Standalone duplicator copies up to nine 3.5" or 2.5" SATA drives at 150 MB/s and offers four DoD-compliant erase modes

  • TypeHard Drive Duplicator
  • Target1 to 9
  • Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
  • Data Transfer Rate150MB/s
  • Operating TypeStandalone
  • ConnectorSATA

Target 1 to 9

Data Transfer Rate 150MB/s

  • Copy up to 9 drives simultaneously at 150 MB/s per slot
  • Two copy modes: Quick Copy for files and Full Copy for whole drives
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no PC or software required for secure duplication

Duplicates up to nine SATA drives simultaneously

This standalone duplicator copies up to nine 3.5 or 2.5 SATA hard drives or solid state drives at once. It operates without a host computer or software, using a four-button controller for direct operation. The unit accepts both HDD and SSD media in its slot-load bays and runs from a 115 to 230 volt AC supply.

Suits IT teams needing secure.

Ideal for workshops, data centres or forensic labs that must clone or sanitise multiple SATA drives quickly and offline. Not for users who need interfaces other than SATA, or who require network-attached or host-dependent operation. The device does not support drive formats outside the SATA specification.

Copy speed of 150 megabytes per second per slot

Each of the nine target ports sustains up to 150 megabytes per second during duplication. This rate determines how long a full drive copy takes and whether the throughput meets your production window.

Highlights

  • Copy up to 9 drives simultaneously at 150 MB/s per slot
  • Two copy modes: Quick Copy for files and Full Copy for whole drives
  • Four erase modes including DoD 3-pass and 7-pass standards
  • Works with 3.5" and 2.5" SATA HDDs and SSDs without adapters
  • Standalone operation — no PC or software required for secure duplication

Specifications

BrandAcumen Disc
Part NumberH09-SATA150
TypeHard Drive Duplicator
Target1 to 9
Supported MediaSATA Hard Drive Disk / SATA Solid State Drive
Data Transfer Rate150MB/s
Operating TypeStandalone
ConnectorSATA
Load TypeSlot
Power SupplyAC: 115-230 V, 50/60 Hz

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install drives in the nine slots and what step is often missed?

Slide each 3.5 or 2.5 SATA drive into a slot until it clicks; the step often missed is ensuring the drive is fully seated so the duplicator detects it at 150MB/s.

What maintenance or replacement will the duplicator need later?

The unit has no user-serviceable parts; only the AC power cord (115-230 V, 50/60 Hz) may need replacement if damaged.

What limit appears first during sustained whole-drive copies across all nine targets?

The 150MB/s per-slot transfer ceiling is reached before any thermal or duty-cycle constraint.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.