Intel DC S3610 SSDSC2BX016T401 1.6TB 2.5" SATA enterprise SSD
- 2.5"
- 1.6TB
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
ADATA
M.2 2280 internal SSD with 1 TB capacity, PCIe Gen4 x4 interface, 7400 MBps sequential read, 6000 MBps sequential write, 780 TBW endurance and a 7.35 mm heatsink
The ADATA LEGEND 960 Max is a 1TB internal solid state drive built for consumer workloads on Intel and AMD platforms. It uses an M.2 2280 form factor with a PCIe Gen4 x4 interface and an SMI SM2264 controller paired with 3D NAND. Sequential reads reach 7400MBps and writes hit 6000MBps, while random performance scales to 730,000 read IOPS and 610,000 write IOPS. The drive carries a 780TBW endurance rating and supports AES 256-bit encryption.
An aluminium alloy heatsink measuring 7.35mm in height covers the drive to maximise heat dissipation. The convection cooling design lowers SSD temperature by 40% during sustained loads, helping maintain stable performance. Operating temperature spans 0°C to 70°C, while storage tolerance extends from -40°C to 85°C. Shock resistance is rated at 1500G for physical durability.
The heatsink dimensions conform to the PS5 expansion slot, allowing direct installation as additional console storage. Firmware supports the NVMe 1.4 standard for broad platform compatibility. AES 256-bit encryption support is included for data security. LDPC error correction technology helps maintain data integrity across the 3D NAND array.
| Brand | ADATA |
|---|---|
| Series | LEGEND 960 Max |
| Model | LEGEND 960 Max |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D NAND |
| Interface | PCIe Gen4 x4 |
| Controller | SMI SM2264 |
| Max Sequential Read | 7400MBps |
| Max Sequential Write | 6000MBps |
| 4KB Random Read | Up to 730,000 IOPS |
| 4KB Random Write | Up to 610,000 IOPS |
| MTBF | 2000000 |
| HeatSink | with HeatSink |
| Operating Temperature | 0 C ~ +70 C |
| Storage Temperature | -40 C ~ +85 C |
| Max Shock Resistance | 1500G |
| Height | 0.130 |
| Width | 0.870 |
| Depth | 3.150 |
| Weight | 0.0200 |
Slide the M.2 2280 drive into the PS5 expansion slot at an angle, press down and secure with the screw; the 7.35mm heatsink fits under the metal cover so the lid closes flush — do not remove the heatsink or add thermal pads.
No user maintenance is required; keep the heatsink fins clear of dust and ensure case airflow stays above 0°C so the controller remains within its 0–70°C operating range.
The heatsink is designed to lower SSD temperature by 40%; under continuous writes the drive will throttle once the controller reaches its 70°C operating ceiling.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?