We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular aluminium ASIC miner with two covered fans and integrated PSU

AFRNDK

AFRNDK Innosilicon T2T 37T SHA-256 ASIC Miner 2200W

SKU CH-MX80-0P2MA

SHA-256 ASIC miner delivers 37 Th/s at 2200 W with dual 12038 fans and integrated PSU

  • Crypto AlgorithmSHA-256
  • Hashrate37T
  • Network ConnectionEthernet
  • Noise level76dB
  • Fan2
  • Power Consumption2200w
  • 37 Th/s SHA-256 hashrate for efficient Bitcoin and BCH mining
  • 2200 W power draw keeps operating cost low
  • Dual 12038 PWM fans with metal covers cool chips at 72 dB noise
  • All-in-one aluminium chassis integrates PSU and simplifies installation
  • Requires 220–240 V supply and cable rated above 1800 W

Purpose & Audience

The AFRNDK Innosilicon T2T is a SHA-256 ASIC miner rated at 37T hashrate for Bitcoin and Bitcoin Cash. It targets operators who run 220-240V circuits and need a single integrated unit with a built-in power supply.

Build & Connectivity

An aluminium shell houses two 12038 PWM fans rated at 4.5A each, producing 72dB to 76dB noise during operation. A single Ethernet port handles network traffic, while the all-in-one design means only a mains cable and network cable are required for setup.

Deciding Specification

The miner draws 2200W at the wall, so the supply cable and circuit must support loads above 1800W continuously. Operation is specified from 5% to 95% relative humidity at 12V input.

Highlights

  • 37 Th/s SHA-256 hashrate for efficient Bitcoin and BCH mining
  • 2200 W power draw keeps operating cost low
  • Dual 12038 PWM fans with metal covers cool chips at 72 dB noise
  • All-in-one aluminium chassis integrates PSU and simplifies installation
  • Requires 220–240 V supply and cable rated above 1800 W

Specifications

BrandInnosilicon
ModelT2T 37T
Crypto AlgorithmSHA-256
Hashrate37T
Network ConnectionEthernet
Noise level76dB
Fan2
Power Consumption2200w

Questions about this item

Does the Ethernet port on the Innosilicon T2T 37T limit the 37Th/s hashrate in practice?

The miner uses a standard Ethernet connection; SHA-256 mining is latency-tolerant so any common wired link will sustain the rated 37Th/s.

What voltage and cable gauge does the T2T 37T need for safe operation?

It requires a 220-240V supply; because wall draw exceeds 1800W the power cable must be rated for that load.

What is the installation step most users miss with this all-in-one unit?

After plugging power and network cable, verify the outlet fan is correctly cabled to the control board beneath the PSU.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.