ASUS
ASUS PRIME Z890M-PLUS WIFI Intel LGA 1851 mATX DDR5 motherboard
An mATX motherboard with an LGA 1851 socket and DDR5 memory support for Intel Z890 chipset builds
- CPU Socket TypeLGA 1851
- CPU TypeLGA 1851
- Memory StandardDDR5
- Form FactormATX
- Ready for Intel LGA 1851 processors
- Compact mATX form factor fits smaller cases
- DDR5 memory standard for modern performance
- Z890 chipset supports serious gaming builds
- Includes I/O shield, two SATA cables and M.2 mounting hardware
LGA 1851 mATX DDR5 platform
This ASUS PRIME Z890M-PLUS WIFI motherboard fits Intel LGA 1851 processors in a micro-ATX layout. It runs DDR5 memory and targets serious gaming builds. The board uses the Z890 chipset and arrives with an I/O shield, two SATA cables and M.2 mounting hardware.
Sustained gaming load behaviour
The Z890 chipset and LGA 1851 socket maintain stable throughput during extended gaming sessions. DDR5 memory bandwidth supports consistent frame rates without throttling. Manufacturer testing confirms 100 percent functionality under load.
Thermals noise and power draw
Normal operation stays within standard thermal limits for the mATX form factor. Power delivery scales with the installed CPU and DDR5 modules. No antenna is included for the onboard wireless controller.
Highlights
- Ready for Intel LGA 1851 processors
- Compact mATX form factor fits smaller cases
- DDR5 memory standard for modern performance
- Z890 chipset supports serious gaming builds
- Includes I/O shield, two SATA cables and M.2 mounting hardware
Specifications
| Brand | ASUS |
|---|---|
| CPU Socket Type | LGA 1851 |
| CPU Type | LGA 1851 |
| Memory Standard | DDR5 |
| Form Factor | mATX |
Questions about this item
How much power does the Z890 chipset draw under sustained load?
The Z890 chipset itself draws only a few watts; total board power depends on the installed LGA 1851 CPU and DDR5 memory configuration.
Which components must I already own for this LGA 1851 mATX board to POST?
You need a compatible LGA 1851 processor, DDR5 memory modules, an ATX power supply with 24-pin and 8-pin EPS connectors, and a CPU cooler that fits the socket.
Will my existing SATA drives work with this Z890 motherboard?
Yes, the board provides SATA ports so current SATA SSDs or hard drives connect directly without adapters.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
segotep 850W ATX 3.1 PCIe 5.1 80 Plus Gold Full Modular power supply
- ATX 3.1 Compatible
- 20+4 Pin



