We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black mid-tower case with aluminium grille front and tempered glass front and side panels

ASUS

ASUS ROG GX601S Mid-Tower PC Case

SKU CH-WF80-QB5R6

Mid-tower case supports EATX, ATX, Micro-ATX and Mini-ITX boards with triple tempered glass panels and front 420 mm liquid-cooler clearance

  • Fits EATX boards up to 12 x 10.9 inches for high-end builds
  • Three tempered glass panels show components from every angle
  • Front panel includes two USB 3.2 Gen 2x2 Type-C ports for fast peripherals
  • Supports front radiators up to 420 mm and top radiators up to 360 mm
  • 33 mm cable routing space keeps the interior clean and organised

Mid-tower case for EATX builds

The ASUS ROG GX601S is a mid-tower chassis designed for builders who need EATX motherboard support up to 12 by 10.9 inches alongside ATX, Micro-ATX and Mini-ITX. It provides four dedicated 2.5-inch drive bays and two combo bays that accept 2.5 or 3.5-inch drives. The front panel includes two USB 3.2 Gen 2x2 Type-C ports, four USB 3.2 Gen 1 ports and a headphone or microphone jack.

Thermals noise and power in normal use

Three-sided tempered glass panels and an aluminium alloy grille give open airflow paths while a 3D noise-reducing filter helps dampen sound during typical workloads. Removable dust filters on the front, top and bottom keep the interior clean without restricting intake. Cable routing space of 33 mm behind the motherboard tray keeps wires tidy and out of the main airflow channels.

Sustained load behaviour

The front supports liquid coolers from 120 up to 420 mm and the top accepts radiators up to 360 mm, allowing high-capacity cooling loops for extended sessions. A rear 120 or 140 mm radiator adds exhaust capacity. Maximum CPU cooler height is 190 mm, GPU clearance reaches 450 mm and the power supply bay fits units up to 220 mm long. Eight standard expansion slots plus two vertical slots give room for multi-card configurations.

Highlights

  • Fits EATX boards up to 12 x 10.9 inches for high-end builds
  • Three tempered glass panels show components from every angle
  • Front panel includes two USB 3.2 Gen 2x2 Type-C ports for fast peripherals
  • Supports front radiators up to 420 mm and top radiators up to 360 mm
  • 33 mm cable routing space keeps the interior clean and organised

Specifications

BrandASUS

Questions about this item

How do I fit the three-piece tempered glass and the aluminium grille without scratching them?

Lay the case flat, fit the front glass first, then slide the left and right panels into their rails before tightening the thumbscrews; the 33 mm cable channel behind the motherboard tray gives room to route wires without pressing on the glass.

Which dust filters need regular cleaning and how are they removed?

Front, top and bottom filters all pull out without tools; vacuum or rinse the mesh every few months to keep airflow to the 3 x 120 mm or 3 x 140 mm front fans and the top radiator mounts.

What thermal limit appears first when running a 420 mm front radiator and a 360 mm top radiator together?

The 190 mm CPU cooler height clearance and the 450 mm GPU length limit remain unchanged, so the loop is constrained by component dimensions rather than radiator capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.