ASUS
ASUS ROG STRIX X870E-H WIFI7 + GX601 Helios Case
An AMD AM5 motherboard with 16+2+1 80A power stages, four M.2 slots and dual USB4 plus a Hatsune Miku aluminium case with four 140mm fans, triple tempered glass and 420mm radiator support
- AI Cooling II and AI Networking II optimize performance automatically
- 16+2+1 phase 80A power delivery supports Ryzen 7000/8000/9000 CPUs
- Four M.2 slots with dedicated heatsinks include two PCIe 5.0 and two PCIe 4.0
- Dual USB4 Type-C and 20Gbps front USB-C with PD 3.0 fast charging
- Aluminum exoskeleton case with 50kg handle, 4×140mm fans, 420mm radiator and 190mm cooler support
ROG STRIX X870E-H with Helios GX601
This bundle pairs a premium AMD AM5 motherboard with a mid-tower chassis finished in official Hatsune Miku artwork. The board targets AI-ready workstations and high-end gaming builds, while the case suits enthusiasts who want a distinctive aluminium exoskeleton and a 50kg load-bearing handle. It is not suited for buyers who need a compact form factor or a more understated aesthetic.
Thermals noise and power delivery
The motherboard uses a 16+2+1 phase 80A power stage design with a large integrated heatsink for stable CPU delivery. Four pre-installed 140mm PWM fans provide strong airflow through the case, and the chassis supports up to a 420mm water radiator or a 190mm air cooler for demanding thermal loads. AI Cooling II automatically tunes fan curves to balance noise and temperature during normal use.
Upgrade path and value
The platform accepts Ryzen 7000 8000 9000 processors and DDR5 memory, with four M.2 slots offering two PCIe 5.0 and two PCIe 4.0 interfaces. Dual USB4 Type-C ports and a 20Gbps front USB-C with PD 3.0 fast charging modernise I/O. Builders moving from an older AM4 system or a board lacking PCIe 5.0 storage and USB4 connectivity will see the largest benefit.
Highlights
- AI Cooling II and AI Networking II optimize performance automatically
- 16+2+1 phase 80A power delivery supports Ryzen 7000/8000/9000 CPUs
- Four M.2 slots with dedicated heatsinks include two PCIe 5.0 and two PCIe 4.0
- Dual USB4 Type-C and 20Gbps front USB-C with PD 3.0 fast charging
- Aluminum exoskeleton case with 50kg handle, 4×140mm fans, 420mm radiator and 190mm cooler support
Specifications
| Brand | MSI |
|---|
Questions about this item
How do I install the motherboard into the GX601 Helios case and what step is often missed?
Align the EATX standoffs, secure the board with the supplied screws, then connect the front-panel 20Gbps USB-C header and PD 3.0 power cable before closing the triple tempered glass panels.
What maintenance will the pre-installed 140mm PWM fans and dust filters need later?
Remove the magnetic dust filters monthly, rinse and dry them, then spin each 140mm fan by hand to check for bearing noise; replace any fan that develops rattle or reduced airflow.
What thermal limit appears first when the 16+2+1 80A power stages run sustained loads?
The large integrated heatsink on the VRM and M.2 slots saturates first, so AI Cooling II ramps the four 140mm fans and any 420mm radiator to keep temperatures stable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PrimoChill Praxis Wetbench Open-Air Test Bench 461.8mm
- Open-Air
SilverStone Technology Strider 1200W 80 Plus Platinum Modular Power Supply
- ATX Mid Tower
- 1200W



