Micron Technology, Inc. MT4JTF12864AZ-1G4D1 1GB DDR3 1333 Desktop RAM
- 1GB
- DDR3 1333 (PC3 1060…
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
ASUS
GeForce RTX 3080 graphics card with 10 GB GDDR6X on a 320-bit bus, 8704 CUDA cores, boost clock up to 1815 MHz, PCIe 4.0 x16, two HDMI 2.1 and three DisplayPort 1.4a outputs
The ASUS TUF Gaming GeForce RTX 3080 is a PCI Express 4.0 graphics card built on the NVIDIA Ampere architecture. It targets gamers and creators who need high frame rates at 4K or high-refresh 1440p. The board carries 10GB of GDDR6X memory on a 320-bit bus with an effective clock of 19 Gbps.
The axial-tech fan layout uses a reversed central fan to reduce turbulence across the heatsink. Dual ball-bearing fans are rated to last up to twice as long as sleeve-bearing alternatives. Military-grade capacitors and other TUF components are selected for durability under sustained loads.
GPU Tweak II software provides performance tuning, thermal controls and system monitoring in one interface. The rear I/O offers two HDMI 2.1 ports and three DisplayPort 1.4a outputs for up to four simultaneous displays. Maximum digital resolution reaches 7680 x 4320 for 8K workflows.
| Brand | ASUS |
|---|---|
| Series | TUF Gaming |
| Model | TUF-RTX3080-O10G-GAMING |
| Interface | PCI Express 4.0 x16 |
| Chipset Manufacturer | NVIDIA |
| GPU Series | NVIDIA GeForce RTX 30 Series |
| GPU | GeForce RTX 3080 |
| Core Clock | 1440 MHz |
| Boost Clock | 1815 MHz |
| CUDA Cores | 8704 |
| Effective Memory Clock | 19 Gbps |
| Memory Size | 10GB |
| Memory Interface | 320-Bit |
| Memory Type | GDDR6X |
| DirectX | DirectX 12 |
| OpenGL | OpenGL 4.6 |
| Multi-Monitor Support | 4 |
| HDMI | 2 x HDMI 2.1 |
| DisplayPort | 3 x DisplayPort 1.4a |
| Max Resolution | 7680 x 4320 |
| SLI Support | No |
| Virtual Reality Ready | Yes |
| Cooler | Triple Fans |
| System Requirements | Recommended PSU: 850W |
| Power Connector | 2 x 8-Pin |
| HDCP Ready | 2.3 |
| Max GPU Length | 300 mm |
| Card Dimensions (L x H) | 11.81" x 5.00" |
| Slot Width | 2.7 slot |
| Package Contents | Accessories: 1 x Collection card 1 x Speedsetup manual 1 x TUF certificate of Reliability |
Seat the card firmly until the retention clip clicks, then attach both 8-pin power connectors; the step most often missed is connecting the second power cable, which prevents the GPU from reaching its 1815 MHz boost clock.
The axial-tech fans use dual ball bearings rated to last up to twice as long as sleeve designs, so routine cleaning with compressed air every few months is typically all that is required.
The 10GB GDDR6X frame buffer running at 19 Gbps across a 320-bit bus fills before the 8704 CUDA cores saturate, so memory capacity becomes the bottleneck in 4K or 7680 x 4320 workloads.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?