BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
$214.99
0.00279516BTC
In stock
Avarum
Avarum Avarum-3L41600-SODIMM 8GB (2x4GB) DDR3L 1600 laptop RAM
Dual-channel 8 GB DDR3L kit running at 1600 MHz with CL11 timing and low 1.35 V operation for laptops and mini-PCs
- Capacity8GB (2 x 4GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3L 1600 (PC3L 12800)
- CAS LatencyCL11
- Voltage1.35V
- ECCNo
- Dual-channel kit doubles bandwidth with two matched 4 GB modules
- Low 1.35 V DDR3L cuts power draw and heat in thin laptops
- CL11 latency at 1600 MT/s keeps everyday tasks responsive
- 204-pin SO-DIMM fits standard DDR3L laptop slots without adapters
- Dual-rank 2Rx8 organisation improves memory controller efficiency
Capacity and Configuration
This kit provides 8 GB of laptop memory organised as two 4 GB modules. It uses 204-pin DDR3L SO-DIMM form factor and runs at 1600 MHz with a CAS latency of 11. The dual-rank 2Rx8 layout suits notebooks and mini-PCs that accept low-voltage DDR3L.
Ideal Buyer and Limitation
Owners of older laptops or compact systems that specify 1.35 V DDR3L memory at 1600 MHz can use this pair to reach 8 GB total capacity. Builders whose devices require a different voltage, a higher speed grade or a single larger module should look elsewhere.
Deciding Specification
The 1.35 V operating voltage identifies this kit as DDR3L rather than standard DDR3. Only systems that explicitly support the lower voltage will recognise and run these modules correctly.
Highlights
- Dual-channel kit doubles bandwidth with two matched 4 GB modules
- Low 1.35 V DDR3L cuts power draw and heat in thin laptops
- CL11 latency at 1600 MT/s keeps everyday tasks responsive
- 204-pin SO-DIMM fits standard DDR3L laptop slots without adapters
- Dual-rank 2Rx8 organisation improves memory controller efficiency
Specifications
| Brand | Avarum |
|---|---|
| Model | Avarum-3L41600-SODIMM |
| Capacity | 8GB (2 x 4GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3L 1600 (PC3L 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
Questions about this item
What does the 1600 MHz rating mean once the kit is installed in a laptop?
The memory runs at 1600 MHz DDR3L, giving a peak transfer rate of PC3L 12800.
Which interface and voltage standard does this kit use, and what does that limit?
It uses 204-pin DDR3L SO-DIMM at 1.35 V, so it only fits slots that accept DDR3L low-voltage modules.
What physical slot and module layout are required to fit the two sticks?
Two 204-pin SO-DIMM slots are needed; each stick is a dual-rank 2Rx8 module.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
