We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips and gold contacts

Axiom

Axiom Z9H60AA-AX 8GB DDR4 2400 CL17 1.2V server RAM

SKU CH-ECMB-WK8R7 MPN Z9H60AA-AX

8GB DDR4 2400 CL17 1.2V unbuffered non-ECC DIMM for EliteDesk 800 G3, ProDesk 400 G4 and 600 G3

  • Capacity8GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Voltage1.20V
  • 8 GB capacity expands server memory headroom
  • DDR4 2400 speed moves data at 2400 MT/s
  • CL17 latency keeps response times tight
  • 20 V operation lowers power draw per module
  • 288-pin DIMM fits compatible server boards

Axiom 8GB DDR4 2400 Server Memory

This Axiom Z9H60AA-AX module provides 8GB of DDR4 server memory. It runs at 2400 MHz with a PC4-19200 rating and operates at 1.20V. The 288-pin DIMM is unbuffered and non-ECC. It is intended for compatible HP EliteDesk and ProDesk workstations.

Suits mainstream office desktops.

This memory fits HP EliteDesk 800 G3 and ProDesk 400 G4 or 600 G3 systems that accept unbuffered non-ECC DIMMs. It is not for servers or workstations that require error-correcting code memory. Buyers needing registered or load-reduced modules should look elsewhere.

DDR4 2400 CL17 at 1.20V unbuffered non-ECC

The key specification is DDR4 2400 speed with CL17 latency at 1.20V in an unbuffered non-ECC 288-pin form factor. Verify your motherboard supports this exact speed, voltage, and module type before purchase. Mismatched specifications will prevent the system from booting.

Highlights

  • 8 GB capacity expands server memory headroom
  • DDR4 2400 speed moves data at 2400 MT/s
  • CL17 latency keeps response times tight
  • 20 V operation lowers power draw per module
  • 288-pin DIMM fits compatible server boards

Specifications

BrandAxiom
ModelZ9H60AA-AX
Capacity8GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Voltage1.20V
Shipping weight0.07 kg
Package size178 × 51 × 0 mm

Questions about this item

Should I pick the 8GB DDR4 2400 CL17 module or a different capacity for my EliteDesk 800 G3?

This module provides 8GB at DDR4 2400 with CL17 latency and 1.20V operation. If your workload fits in 8GB and your board accepts unbuffered non-ECC DIMMs, this is the correct capacity.

What does the DDR4 2400 speed rating mean once the stick is installed in my ProDesk 600 G3?

The module runs at up to 2400 MT/s with CL17 timing at 1.20V. Your system will negotiate the highest common speed supported by the CPU and chipset, so actual throughput depends on that negotiation.

The spec says PC4-19200 — what does that interface cap in practice?

PC4-19200 is the peak transfer rate designation for DDR4 2400. The 288-pin DIMM delivers data at up to 2400 MT/s per pin, and the memory controller limits the sustained bandwidth to what the platform can sustain.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.