We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White full-tower ATX case with mesh front panel, tempered glass side, three pre-installed 140mm fans and ARGB lighting

be quiet!

be quiet! BGW59 Dark Base 701 ATX Full Tower PC Case White

SKU CH-CH0E-JY22T MPN BGW59

A mesh-front ATX full-tower case with three pre-installed 140 mm Silent Wings 4 fans, PWM and ARGB hubs, and support for E-ATX boards, 430 mm GPUs and 360 mm radiators

  • TypeATX Full Tower
  • ColorWhite
  • Case MaterialSteel (SGCC), ABS plastic
  • With Power SupplyNo
  • Motherboard CompatibilityE-ATX (30.5 x 27.5cm), ATX, M-ATX, Mini-ITX
  • Side PanelTempered Glass Panel
  • Mesh front and top deliver maximum airflow for air or water cooling
  • Three pre-installed Silent Wings 4 140mm fans run at 1900 rpm for high static pressure
  • PWM and ARGB hub controls up to eight PWM fans and two ARGB components
  • Removable top and front brackets simplify radiator installation up to 360mm
  • Invertible motherboard tray supports vertical GPU mounting with optional riser cable

White Full Tower for Airflow Builds

The be quiet! BGW59 Dark Base 701 is a white ATX full tower case with an open mesh front and top panel designed for maximum airflow. It supports E-ATX motherboards up to 30.5 by 27.5 centimetres, ATX, M-ATX and Mini-ITX. Three Silent Wings 4 140 millimetre PWM high-speed fans are pre-installed at the front, top and rear, each spinning at 1900 RPM. A tempered glass side panel shows the interior ARGB lighting.

Tool-less Drive Mounts and Removable Brackets

Drive installation is tool-less for both 2.5 inch and 3.5 inch bays, with up to five 2.5 inch and three 3.5 inch positions available. The front and top radiator brackets are removable, simplifying fan or radiator mounting before the hardware is placed inside. A PWM and ARGB hub supports up to eight PWM fans and two ARGB components, while a front panel controller offers three-step fan speed and ARGB mode selection. The motherboard tray can be inverted for alternative layouts.

Check GPU Length and CPU Cooler Height

Before ordering, verify that your graphics card does not exceed 430 millimetres in length and that your CPU cooler is no taller than 185 millimetres. The power supply compartment accepts units up to 250 millimetres long. Front and top radiator support includes 120, 140, 240, 280 and 360 millimetre sizes; the rear supports 120 millimetres only. Front I/O provides one USB 3.2 Gen 2 Type-C port, two USB 3.2 Type-A ports, audio jacks and the fan and ARGB controllers.

Highlights

  • Mesh front and top deliver maximum airflow for air or water cooling
  • Three pre-installed Silent Wings 4 140mm fans run at 1900 rpm for high static pressure
  • PWM and ARGB hub controls up to eight PWM fans and two ARGB components
  • Removable top and front brackets simplify radiator installation up to 360mm
  • Invertible motherboard tray supports vertical GPU mounting with optional riser cable

Specifications

Brandbe quiet!
ModelBGW59
TypeATX Full Tower
ColorWhite
Case MaterialSteel (SGCC), ABS plastic
With Power SupplyNo
Motherboard CompatibilityE-ATX (30.5 x 27.5cm), ATX, M-ATX, Mini-ITX
Side PanelTempered Glass Panel
LEDARGB
Dust FiltersBottom / Front
Internal 3.5" Drive Baysup to 5x 2.5" (3 included)
Internal 2.5" Drive Baysup to 3x 3.5" (2 included)
Expansion Slots7 + 3
Front Ports1 x USB 3.2 Gen 2 Type-C, 2 x USB 3.2 Type-A, 2 x Audio, fan controller (3-step), ARGB controller
Fan OptionsPreinstalled fans (mm) / (rpm):
Front: 1x Silent Wings 4 140 / 1900
Top: 1x Silent Wings 4 140 / 1900
Rear: 1x Silent Wings 4 140 / 1900
Maximum fans (mm):
Front: 3x 140 / 120
Top: 3x 140 / 120
Bottom: 1x 140 / 120
Rear: 1x 140 / 120
Pre-installed FansFront - 1 x 140mm / Rear - 1 x 140mm / Top - 1 x 140mm
Radiator OptionsFront: 120 / 140 / 240 / 280 / 360mm
Top: 120 / 140 / 240 / 280 / 360mm
Rear: 120mm
Max GPU Length430 mm
Max CPU Cooler Height185 mm
Max PSU Length250 mm
Dimensions565 x 249 x 523 mm
Weight12.8 kg
Shipping weight15.47 kg
Package size670 × 597 × 349 mm

Questions about this item

How do I confirm the three pre-installed Silent Wings 4 fans are running correctly after building in the BGW59?

Connect the PWM hub to a motherboard header, power on, and verify each 140 mm fan spins; use the case's 3-step fan controller or BIOS to adjust speed and listen for smooth operation.

What does the Dark Base 701 box contain and which major parts must I purchase separately for a complete build?

The case includes three 140 mm Silent Wings 4 fans, a PWM and ARGB hub, tempered glass side panel, dust filters, and drive trays for two 3.5" and three 2.5" drives; you must add a power supply, motherboard, CPU cooler, graphics card, storage, and memory.

Which version of the Dark Base 701 should I choose if I need maximum radiator support and GPU clearance?

This BGW59 white model supports front and top radiators up to 360 mm, a rear 120 mm radiator, graphics cards up to 430 mm long, and CPU coolers up to 185 mm tall, fitting E-ATX boards up to 30.5 x 27.5 cm.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.