We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 27 inch flat IPS monitor on a tilt stand with thin bezels

BenQ

BenQ GW2790P 27" 120Hz IPS monitor

SKU CH-Y1B9-N2ZT0 MPN GW2790P

A 27-inch IPS panel with a 120 Hz refresh rate, 1 ms MPRT response time and 99% sRGB colour coverage for smooth everyday viewing

  • Cabinet ColorBlack
  • Screen Size27"
  • WidescreenYes
  • Resolution1920 x 1080
  • Refresh Rate120Hz
  • Viewing Angle178° (H) / 178° (V)
  • Smooth motion from 120Hz refresh rate
  • Accurate colours with 99% sRGB coverage
  • Wide viewing angles via 178° IPS panel
  • Low latency thanks to 1 ms MPRT response
  • Flexible connections through DisplayPort 1.2 and HDMI 1.4

27-inch 120Hz IPS Monitor

The BenQ GW2790P is a 27-inch flat-panel display built on an IPS panel with a 120Hz refresh rate. It targets office workers and casual users who want smoother motion than a standard 60Hz screen without moving to a high-end gaming panel. The 1920 x 1080 resolution and 99% sRGB coverage suit general productivity, web browsing and video playback.

Sustained Load Behaviour

Under continuous use the monitor draws 25 W in normal operation and peaks at 33 W, with sleep mode dropping below 0.5 W. The 1 ms MPRT response time is measured with the backlight strobing mode active, which reduces perceived blur during long sessions. Brightness stays at 250 cd/m² and the 1,500:1 contrast ratio remains stable across the 178° horizontal and vertical viewing angles.

DisplayPort 1.2 and HDMI 1.4 Limits

The single DisplayPort 1.2 and HDMI 1.4 inputs both support the full 1920 x 1080 resolution at 120Hz. Higher refresh rates or resolutions beyond 1080p are not possible on either port. The stand offers tilt adjustment only; height, swivel and pivot require a separate VESA 100 x 100 mm mount. Buyers who need USB-C video, built-in KVM or a fully ergonomic stand should look elsewhere.

Highlights

  • Smooth motion from 120Hz refresh rate
  • Accurate colours with 99% sRGB coverage
  • Wide viewing angles via 178° IPS panel
  • Low latency thanks to 1 ms MPRT response
  • Flexible connections through DisplayPort 1.2 and HDMI 1.4

Specifications

BrandBenQ
ModelGW2790P
Cabinet ColorBlack
Screen Size27"
WidescreenYes
Resolution1920 x 1080
Refresh Rate120Hz
Viewing Angle178° (H) / 178° (V)
Brightness250 cd/m2
Contrast Ratio1,500:1
Aspect Ratio16:9
Response Time1 ms (MPRT)
PanelIPS
Color Gamut99% sRGB
Curved Surface ScreenFlat Panel
Video Ports1 x DisplayPort 1.2 / 1 x HDMI 1.4
Power Supply100 - 240 VAC, 50/60Hz
Power ConsumptionPower Consumption (normal): 25 W
Power Consumption (max): 33 W
Power Consumption (sleep mode): <0.5 W
Stand AdjustmentsTilt
Built-in Speakers2 x 2W
Built-in WebcamNo
VESA Compatibility - Mountable100 x 100mm
Dimensions17.9" x 24.3" x 7.2" with stand
14.6" x 24.3" x 1.8" without stand
Weight8.55 lbs. with stand
3.5 lbs. without stand
Shipping weight4.99 kg
Package size711 × 483 × 254 mm

Questions about this item

How much power does the GW2790P draw during an all-day session?

Normal operation uses 25 W and peaks at 33 W, while sleep drops below 0.5 W, so heat output stays modest for continuous use.

Which cables or adapters must I already have to connect the GW2790P?

You need a DisplayPort 1.2 or HDMI 1.4 cable matching your graphics output; the monitor includes no other video interfaces.

Will my older GPU with only HDMI 1.4 run the GW2790P at 120 Hz?

Yes, the HDMI 1.4 port supports the full 1920 x 1080 120 Hz signal, so legacy cards can drive the panel at its native refresh rate.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.