We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with eight silver SlimSAS connectors and a metal bracket

Broadcom

Broadcom 05-50123-00 9670-24i Tri-Mode 24G SAS RAID controller

SKU CH-JK3E-8EGFV MPN 05-50123-00

Connects up to 240 SAS or SATA devices and 32 NVMe drives with PCIe 4.0, RAID 0, 1, 5, 6, 10, 50, 60 and JBOD via SFF-8654 connectors

  • Connect up to 240 SAS/SATA devices with 24G Tri-Mode performance
  • Add 32 NVMe drives through SFF-8654 SlimSAS x8 connectors
  • Protect critical data using RAID 0, 1, 5, 6, 10, 50, 60 and JBOD
  • Secure boot with SPDM attestation and CacheVault flash cache protection
  • Accelerate high-bandwidth workloads via PCIe 4.0 connectivity

Broadcom 9670-24i Tri-Mode RAID Controller

The Broadcom 05-50123-00 is a 24G SAS RAID controller that supports up to 240 SAS or SATA devices or 32 NVMe drives per card. It connects through a PCIe 4.0 interface and uses SFF-8654 SlimSAS x8 ports for cable attachment. Hardware Secure Boot and SPDM attestation are included for platform integrity. The form-factor friendly cable exit eases routing inside dense chassis.

Suited for servers needing many drive connections

This card suits administrators who need RAID 0, 1, 5, 6, 10, 50, 60 or JBOD across large SAS, SATA or NVMe arrays. CacheVault flash cache protection preserves write data during power loss. Builders who need internal port counts beyond 24 devices per controller or who require a different connector type should look at other models.

24G SAS speed and 240-device SAS/SATA scaling

The single specification that decides fit is the 24G SAS transfer rate combined with support for up to 240 SAS or SATA endpoints per controller. If the deployment demands that bandwidth and device count, this part matches; if the environment uses slower links or fewer drives, a lower-tier controller may suffice.

Highlights

  • Connect up to 240 SAS/SATA devices with 24G Tri-Mode performance
  • Add 32 NVMe drives through SFF-8654 SlimSAS x8 connectors
  • Protect critical data using RAID 0, 1, 5, 6, 10, 50, 60 and JBOD
  • Secure boot with SPDM attestation and CacheVault flash cache protection
  • Accelerate high-bandwidth workloads via PCIe 4.0 connectivity

Specifications

No published specifications for this item yet.

Questions about this item

What type of cable connectors does the 9670-24i use for its 24G SAS ports?

The 9670-24i uses SFF-8654 (SlimSAS) x8 connectors for its 24G SAS ports. These connectors support up to 240 SAS/SATA devices or 32 NVMe devices per controller.

Which PCIe slot generation is required to install the 9670-24i controller?

The 9670-24i requires a PCIe 4.0 slot for installation. A common mistake is installing it in a PCIe 3.0 slot, which limits the 24G SAS bandwidth and NVMe performance.

How is the onboard cache protected on the 9670-24i during a power loss?

The 9670-24i uses CacheVault flash cache protection to preserve cached data during power loss. This hardware feature writes cache contents to non-volatile flash without requiring a separate battery module.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.