We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 288-pin DDR4 RDIMM module with black chips and gold contacts

Brute Networks

Brute Networks 16GB DDR4-2133 CL15 2Rx4 Registered RDIMM server RAM

SKU CH-KF1F-YGD45

16 GB registered DDR4 server module with ECC, CL15 latency and 1.2 V operation

  • Capacity16GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.20V
  • ECCYes
  • 16 GB DDR4-2133 CL15 registered ECC RDIMM for server stability
  • 20 V low-voltage operation reduces power draw in dense racks
  • 2Rx4 dual-rank layout maximises memory density per slot
  • HP 752369-081 compatible — validated for drop-in upgrades
  • Lifetime warranty backed by major-brand Samsung, SK Hynix or Micron chips

16GB Registered DDR4 for HP servers

This 16GB DDR4-2133 registered DIMM is built for HP servers that require ECC memory. It runs at PC4-17000 speed with a CAS latency of 15 and operates at 1.20V. The module uses a 2Rx4 organisation and a 288-pin form factor. It suits administrators expanding memory in compatible HP platforms.

Thermals and power profile

Registered modules add a register between the DRAM and the memory controller, which reduces electrical load on the bus. The 1.20V operating voltage keeps power draw low for dense server configurations. No active cooling is present on the DIMM itself; airflow within the chassis handles heat dissipation. Noise is determined entirely by the server fans.

Compatibility assurance and validation

Each module is tested for 100% compatibility with the target HP part number 752369-081. Brute Networks sources chips from major manufacturers such as Samsung, SK Hynix or Micron. Identically matched modules are shipped together to avoid mixing revisions. A lifetime warranty covers the memory for the duration of ownership.

Highlights

  • 16 GB DDR4-2133 CL15 registered ECC RDIMM for server stability
  • 20 V low-voltage operation reduces power draw in dense racks
  • 2Rx4 dual-rank layout maximises memory density per slot
  • HP 752369-081 compatible — validated for drop-in upgrades
  • Lifetime warranty backed by major-brand Samsung, SK Hynix or Micron chips

Specifications

BrandHP
Capacity16GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.20V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor Brand Chipset

Questions about this item

How do I install this 288-Pin DDR4 RDIMM and what step do people get wrong?

Align the notch on the 288-Pin module with the slot key, press down firmly until both side clips click, and ensure the registered buffer is seated; the common error is stopping before the clips fully engage.

What maintenance or replacement will this 16GB registered ECC module need later?

No scheduled maintenance is required; if a correctable ECC error count rises over time, replace the module, otherwise it runs for the server's life.

What limit appears first on this CL15 1.20V DDR4-2133 kit under sustained load?

The CL15 latency at 2133 MT/s sets the throughput ceiling before thermal throttling becomes a factor at 1.20V.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.