We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green rectangular memory module with gold contacts and black chips

Brute Networks

Brute Networks 16GB DDR5-4800 ECC Registered RDIMM AC517139

SKU CH-WP6H-3M7AS

16 GB DDR5-4800 ECC registered RDIMM, Dell AC517139 compatible for server upgrades

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor Brand Chipset
  • 16 GB DDR5-4800 capacity for high-throughput workloads
  • ECC registered design detects and corrects memory errors
  • Dell PN AC517139 equivalent ensures drop-in compatibility
  • 1Rx8 organisation balances density and signal integrity
  • Lifetime warranty covers the module for its service life

16GB DDR5-4800 ECC RDIMM for Dell servers

This 16GB DDR5-4800 ECC Registered RDIMM is built for Dell servers that require PC5-38400 registered memory with error correction. It matches Dell part number AC517139 and uses major-brand components. The module targets administrators who need a direct replacement for factory memory in compatible Dell platforms. It is not suited for systems that accept only unbuffered or non-ECC DDR5 modules.

DDR5-4800 registered interface limits

The DDR5-4800 registered interface adds a clock cycle of buffering, which stabilises heavy loads but prevents use in boards wired for unbuffered DIMMs. ECC operation requires a chipset and BIOS that enable the feature; without that support the module will still run but without error correction. Maximum capacity and population rules are set by the server model, so the 16GB size may not reach the platform limit.

Straightforward DIMM installation

Installation follows standard RDIMM procedure: power down, open the chassis, align the key notch, and press until the ejectors latch. The registered design means the memory controller sees a buffered load, so mixing registered and unbuffered modules in the same channel will prevent boot. Firmware must recognise the SPD data at DDR5-4800; a BIOS update is sometimes needed on older Dell revisions.

Highlights

  • 16 GB DDR5-4800 capacity for high-throughput workloads
  • ECC registered design detects and corrects memory errors
  • Dell PN AC517139 equivalent ensures drop-in compatibility
  • 1Rx8 organisation balances density and signal integrity
  • Lifetime warranty covers the module for its service life

Specifications

BrandDell
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor Brand Chipset

Questions about this item

Should I pick the 16 GB DDR5-4800 ECC registered RDIMM or a different capacity for my Dell server?

This module provides 16 GB of DDR5-4800 ECC registered memory in a 1Rx8 layout. Choose it when your configuration calls for a single 16 GB stick; add more identical modules to reach the total capacity your workload requires.

What does the PC5-38400 rating mean for actual throughput in my system?

PC5-38400 indicates a peak transfer rate of 38 400 MB/s at the rated DDR5-4800 speed. Real-world bandwidth will be slightly lower due to protocol overhead and any platform-imposed limits.

Does the DDR5-4800 registered ECC interface cap performance on newer Dell platforms?

The module runs at DDR5-4800 with registered ECC signalling. If the platform supports higher DDR5 speeds, the memory controller will down-clock this kit to 4800 MT/s, capping peak bandwidth at the PC5-38400 level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.