We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Brute Networks

Brute Networks P06190-001 64GB DDR4-2933 4Rx4 Load Reduced server RAM

SKU CH-2P4X-3FMGR

64 GB DDR4-2933 load-reduced ECC server memory with 4Rx4 organisation, 1.2 V operation and 288-pin form factor

  • Capacity64GB
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2933 (PC4 23400)
  • Voltage1.20V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • 64GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Load Reduced 4Rx4 design enables high-density configurations
  • 2V operation reduces power draw per module
  • 100% HPE compatible validated for P06190-001 equivalence

64 GB DDR4-2933 Load Reduced Module

This 64 GB DDR4-2933 Load Reduced DIMM targets HPE server owners who need maximum density per slot. The 4Rx4 organisation and 1.2 V operation suit memory-heavy workloads such as virtualisation or in-memory databases. It is not for buyers who want more storage or builders who need a second card.

288-Pin Installation and Compatibility

The module plugs into any standard 288-pin DDR4 slot keyed for registered memory. Load Reduced buffering reduces electrical load on the memory controller, so population rules differ from standard RDIMMs; consult the server manual for supported slot sequences. Mismatched ranks across channels will prevent boot.

Sustained Load Behaviour

Major-brand DRAM chips (Samsung, SK Hynix or Micron) and 100 % validated testing keep error-correction active during continuous operation. The 1.2 V supply limits thermal rise under prolonged write-heavy traffic. Modules ship identically matched to avoid timing drift in large arrays.

Highlights

  • 64GB capacity supports memory-intensive server workloads
  • DDR4-2933 speed delivers 23400 MT/s data rate
  • Load Reduced 4Rx4 design enables high-density configurations
  • 2V operation reduces power draw per module
  • 100% HPE compatible validated for P06190-001 equivalence

Specifications

BrandHPE
Capacity64GB
Type288-Pin DDR4 SDRAM
SpeedDDR4 2933 (PC4 23400)
Voltage1.20V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor Brand Chipset

Questions about this item

How can I verify the module is running at DDR4-2933 with ECC after installation?

Check the BIOS or UEFI memory information screen; it should report 2933 MT/s, 1.20 V, ECC enabled and a 4Rx4 load-reduced configuration for each installed stick.

What ships with the P06190-001 module and do I need anything extra to install it?

The box contains the single 64 GB 288-pin DDR4 DIMM; no extra brackets, cables or software are required — just an available DDR4 RDIMM slot on a compatible HPE server.

When should I choose this 64 GB 4Rx4 load-reduced version instead of a lower-capacity or single-rank kit?

Select this module when your server needs maximum density per slot and supports load-reduced DIMMs; the 4Rx4 organisation delivers 64 GB in one DIMM while keeping electrical loading low.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.