SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501555BTC
In stock
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3-1333 SODIMM for Dell Precision M4600
16 GB kit of two 8 GB DDR3 SODIMM modules at 1333 MHz CL9 for Dell Precision M4600 workstations
- Capacity16GB (2 x 8GB)
- Type204-Pin DDR3 SO-DIMM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- 16 GB kit (2 × 8 GB) for Dell Precision M4600
- DDR3-1333 speed with CL9 latency
- 5 V unbuffered non-ECC modules
- 204-pin SODIMM form factor fits notebook slots
- Guaranteed compatibility with Precision M4600 workstation
16GB DDR3-1333 SODIMM Kit for Dell Precision M4600
This 16GB kit contains two 8GB DDR3-1333 SODIMM modules built for the Dell Precision M4600 mobile workstation. Each stick uses a 204-pin layout, runs at 1.5V and carries CL9 9-9-9 timings. The memory is unbuffered, non-ECC and organised as 2Rx8 with major-brand chips.
Upgrading from lower-capacity or slower DDR3 SODIMMs
The M4600 ships with various memory configurations; this kit raises total capacity to 16GB on dual-core models or 32GB on quad-core models when all four sockets are filled. Modules must be installed in matched pairs to enable dual-channel operation. The jump is worthwhile when the workload demands more than the factory-fitted amount or when existing sticks run below 1333MHz.
Check processor core count
Dual-core M4600 systems only address two of the four SODIMM slots, limiting maximum memory to 16GB. Quad-core versions can use all four slots for up to 32GB. A 64-bit operating system is required once 4GB or more is installed. Verify the CPU type in your unit and confirm the OS architecture before purchase.
Highlights
- 16 GB kit (2 × 8 GB) for Dell Precision M4600
- DDR3-1333 speed with CL9 latency
- 5 V unbuffered non-ECC modules
- 204-pin SODIMM form factor fits notebook slots
- Guaranteed compatibility with Precision M4600 workstation
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10246410600SODRH |
| Capacity | 16GB (2 x 8GB) |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Precision Mobile Workstation M4600 |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How many 204-pin SODIMM slots does the Dell Precision M4600 have for this 16GB kit?
The notebook has four sockets. With a dual-core processor only two sockets can be upgraded. With a quad-core processor all four sockets can be used.
What is the correct way to install these two 8GB modules for dual-channel operation?
Modules must be ordered and installed in matched pairs. Insert both sticks into the same channel pair of slots to enable dual-channel mode.
When will I need to replace these CL9 1.5V DDR3 modules?
These modules carry a limited lifetime warranty from the manufacturer. They have no moving parts and require no scheduled replacement under normal use.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
