SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00502358BTC
In stock
Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR3 1333MHz ECC Non-Registered DIMM - B87
16 GB DDR3 1333 MHz ECC unregistered DIMM kit validated for HP ProLiant ML310e Gen8 servers
- Capacity16GB (2 x 8GB)
- Type240-Pin DDR3 SDRAM
- SpeedDDR3 1333 (PC3 10600)
- CAS LatencyCL9
- Timing9-9-9
- Voltage1.5V
- ECC protection guards data integrity on Xeon servers
- 16 GB kit (2 × 8 GB) doubles capacity to 32 GB max
- DDR3 1333 MHz CL9 timing matches ProLiant ML310e Gen8 specs
- Unregistered 240-pin DIMMs install in matched pairs as required
- 5 V standard voltage keeps power draw predictable
Server-specific DDR3 ECC kit
This 16 GB kit contains two 8 GB DDR3-1333 modules built for the HP ProLiant ML310e Gen8 server. The memory is ECC non-registered with a CL9 timing and runs at the standard 1.5 V. Installation must be done in matched pairs or groups of four to meet the platform requirements. A 64-bit operating system is needed to address the full capacity.
Steady throughput for always-on workloads
Under continuous server loads the ECC logic corrects single-bit errors without halting the system. The dual-rank 2Rx8 organisation keeps bandwidth stable across all four DIMM slots when the maximum 32 GB is populated. Latency remains fixed at 9-9-9 so queue depth does not grow during sustained read-write cycles.
Passive cooling and standard power draw
Without a heat spreader the modules rely on the server's directed airflow, adding no extra acoustic load. Each DIMM draws 1.5 V at the rated DDR3-10600 speed, matching the platform's power budget. The unbuffered design avoids the extra current draw that registered modules would impose on the memory controller.
Highlights
- ECC protection guards data integrity on Xeon servers
- 16 GB kit (2 × 8 GB) doubles capacity to 32 GB max
- DDR3 1333 MHz CL9 timing matches ProLiant ML310e Gen8 specs
- Unregistered 240-pin DIMMs install in matched pairs as required
- 5 V standard voltage keeps power draw predictable
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM10247210600ECCNR2R8 |
| Capacity | 16GB (2 x 8GB) |
| Type | 240-Pin DDR3 SDRAM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Timing | 9-9-9 |
| Voltage | 1.5V |
| ECC | Yes |
| Buffered/Registered | Unregistered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Proliant Ml310E Gen8 (G8)U |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How much power does the 1.5 V DDR3 kit draw under continuous load?
Each module runs at the standard 1.5 V DDR3 voltage, so power draw is determined by the server's memory controller rather than the sticks themselves.
What CPU must the ML310e Gen8 already have for these unregistered ECC DIMMs to work?
The server needs a Xeon E3 series processor, because that line requires unbuffered ECC memory and does not support registered ECC modules.
Will the CL9 1333 MHz modules run correctly beside any existing PC3-10600 sticks already in the four DIMM slots?
Yes, all four slots accept PC3-10600 ECC unbuffered DIMMs, and the system will operate at the common 1333 MHz speed when populated in matched pairs.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
