Computer Memory Solutions
Computer Memory Solutions 16GB (2x8GB) DDR4 2400MHz CL17 Non-ECC DIMM memory upgrade - C112
A 16 GB dual-channel DDR4 kit rated 2400 MHz CL17, built for Gigabyte Z170 motherboards
- Capacity16GB (2 x 8GB)
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 16 GB dual-channel kit lifts multitasking headroom
- CL17 timing at 2400 MHz keeps latency low
- 2 V DDR4 modules reduce power draw
- Validated for Gigabyte Z170 motherboards
- Lifetime repair or exchange warranty included
Kit contents and purpose
This 16GB kit contains two 8GB DDR4 modules built for Gigabyte GA-Z170-D3H, GA-Z170-Gaming K3, GA-Z170-HD3 and GA-Z170-HD3P motherboards. It is aimed at owners of those boards who want a matched pair of DIMMs that the vendor guarantees will work.
Who should buy and who should not
Builders with one of the four listed Gigabyte Z170 boards and four empty DIMM slots can use this kit to reach 16GB. Systems limited to 4GB or 8GB maximum, boards that require ECC or registered memory, or users who need more than 16GB in two slots should look elsewhere.
Deciding specification
The kit runs at DDR4 2400 (PC4-19200) with CL17 timings at 1.2V on 288-pin unbuffered DIMMs; this speed, voltage and pin layout together decide whether the modules will be accepted by the target motherboards.
Highlights
- 16 GB dual-channel kit lifts multitasking headroom
- CL17 timing at 2400 MHz keeps latency low
- 2 V DDR4 modules reduce power draw
- Validated for Gigabyte Z170 motherboards
- Lifetime repair or exchange warranty included
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM1024642400DIMM |
| Capacity | 16GB (2 x 8GB) |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Gigabyte GA-Z170-D3H, GA-Z170-Gaming K3, GA-Z170-HD3, GA-Z170-HD3P Motherboards |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How do I install these 288-pin DDR4 DIMMs on the GA-Z170-D3H, and which step is often missed?
Power off, open the case, align the notch on each 288-pin stick with the slot key, press down until both side clips click, then enter the BIOS to confirm the kit runs at DDR4 2400 CL17 1.2V.
What maintenance or replacement will this 16GB kit need over its lifetime?
No scheduled maintenance is required; the modules carry a limited lifetime warranty from Computer Memory Solutions, so a replacement would only occur if a manufacturing defect appears.
What limit appears first when this memory runs sustained workloads on the GA-Z170-Gaming K3?
The DDR4 2400 CL17 1.2V specification is the ceiling; the JEDEC-rated speed and latency define the maximum stable throughput under continuous load.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



