We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 16GB DDR4 2400 2x8GB CL17 C112

SKU CH-8YT1-FHEMB

16 GB DDR4 2400 MHz dual-channel kit, CL17 1.2 V unbuffered DIMMs validated for MSI X99A Gaming 7, Godlike, Tomahawk, Workstation and XPOWER AC boards

  • Capacity16GB (2 x 8GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 16 GB dual-channel kit for higher bandwidth
  • DDR4 2400 MT/s speed for responsive performance
  • CL17 17-17-17 timings for low latency
  • 2 V operation reduces power draw
  • Validated for MSI X99A Gaming 7, GODLIKE, Tomahawk, Workstation, XPOWER AC

16 GB DDR4 kit for MSI X99A boards

This 16 GB kit contains two 8 GB DDR4 2400 modules rated CL17 at 1.2 V. It is built for MSI X99A Gaming 7, Godlike Gaming, Tomahawk, Workstation and XPOWER AC motherboards. The unbuffered non-ECC DIMMs use a 288-pin layout and ship as a matched pair.

DDR4 2400 speed and platform limits

The modules run at DDR4 2400 (PC4 19200) with 17-17-17 timings. The supported MSI X99A boards provide eight DIMM slots and a maximum memory capacity of 128 GB. Installing this kit occupies two slots and leaves six slots available for further expansion within that platform limit.

Check motherboard model and slot count

Verify that your motherboard is one of the five listed MSI X99A models before ordering. Confirm you have at least two free 288-pin DDR4 slots for the dual-channel kit. The platform supports up to 128 GB across eight sockets, so total capacity after installation must stay within that ceiling.

Highlights

  • 16 GB dual-channel kit for higher bandwidth
  • DDR4 2400 MT/s speed for responsive performance
  • CL17 17-17-17 timings for low latency
  • 2 V operation reduces power draw
  • Validated for MSI X99A Gaming 7, GODLIKE, Tomahawk, Workstation, XPOWER AC

Specifications

BrandComputer Memory Solutions
ModelCM1024642400DIMM
Capacity16GB (2 x 8GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemMSI X99A Gaming 7, X99A GODLIKE Gaming, X99A Tomahawk, X99A Workstation, X99A XPOWER AC Motherboards
Package Content2 Memory RAM Sticks

Questions about this item

Should I choose the 16GB 2x8GB kit or a single 16GB module?

The 2x8GB kit runs in dual-channel on the listed MSI X99A boards, doubling memory bandwidth compared with a single stick.

What does the 2400MHz rating deliver in a real system?

On a compatible X99A platform the modules operate at 2400MHz with CL17 timings at 1.2V, providing the rated PC4-19200 throughput.

How does the DDR4 288-pin interface limit performance?

The DDR4 288-pin DIMM interface caps transfer rate at 2400MHz on these boards, so the kit cannot exceed its PC4-19200 specification.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.