Computer Memory Solutions
Computer Memory Solutions 16GB DDR4 2400MHz CL17 1.2V 288-Pin DIMM memory upgrade C113
16 GB DDR4 2400 MHz CL17 unbuffered DIMM for HP EliteDesk 705 G3 and 800 G2/G3 systems
- Capacity16GB
- Type288-Pin DDR4 SDRAM
- SpeedDDR4 2400 (PC4 19200)
- CAS LatencyCL17
- Timing17-17-17
- Voltage1.2V
- 16GB DDR4 2400MHz boosts multitasking on compatible HP EliteDesk systems
- CL17 latency and 1.2V operation keep performance stable and power draw low
- 288-pin unbuffered non-ECC DIMM fits EliteDesk 705 G3 and 800 G2/G3 slots
- Single 16GB module supports up to 64GB total across four sockets
- Major-brand chipset and lifetime warranty from CMS ensure reliable long-term use
Target System Compatibility
This 16GB DDR4 2400MHz CL17 DIMM is designed for HP EliteDesk 705 G3 and 800 G2/G3 series desktops. It provides a single-module memory upgrade for supported tower and small form factor models. The unbuffered non-ECC specification matches the requirements of these business-class systems.
Pre-Installation Checks
Verify your motherboard has an available 288-pin DDR4 slot and supports 2400MHz operation at 1.2V. The system maximum is 64GB across four sockets so confirm current population before ordering. This module uses 2Rx8 organisation and major-brand chipsets for validated compatibility.
Thermal and Power Profile
Operating at standard 1.2V DDR4 voltage the module draws minimal power and runs without a heat spreader. Passive cooling in the chassis airflow is sufficient for normal office workloads. The unbuffered design adds negligible electrical load to the memory controller.
Highlights
- 16GB DDR4 2400MHz boosts multitasking on compatible HP EliteDesk systems
- CL17 latency and 1.2V operation keep performance stable and power draw low
- 288-pin unbuffered non-ECC DIMM fits EliteDesk 705 G3 and 800 G2/G3 slots
- Single 16GB module supports up to 64GB total across four sockets
- Major-brand chipset and lifetime warranty from CMS ensure reliable long-term use
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM2048642400DIMM |
| Capacity | 16GB |
| Type | 288-Pin DDR4 SDRAM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Timing | 17-17-17 |
| Voltage | 1.2V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | HP/Compaq EliteDesk 705 G3 MT/SFF, EliteDesk 800 G2 Series Tower/SFF, EliteDesk 800 G3 Series Tower/SFF |
| Package Content | 1Memory Ram Stick |
Questions about this item
Does the box contain just the single 16 GB stick or are extra brackets or cables included?
The package includes one 16 GB DDR4 2400 MHz CL17 1.2 V 288-pin unbuffered DIMM and nothing else.
My EliteDesk 800 G3 Tower has four slots and supports 64 GB maximum — should I buy one 16 GB module or two 8 GB modules?
Each slot accepts a 16 GB stick, so one module adds 16 GB and leaves three slots free for future expansion up to the 64 GB limit.
Will the rated 2400 MHz speed actually run at 2400 MHz once installed in an EliteDesk 705 G3 SFF?
The module is programmed for DDR4-2400 (PC4-19200) CL17 and will operate at that speed provided the system BIOS supports it.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



