Computer Memory Solutions
Computer Memory Solutions 2GB DDR2 800 Presario Cq60 Cq61 memory upgrade
A 2 GB DDR2 800 SODIMM module built for HP and Compaq Presario Cq60 and Cq61 notebooks
- Capacity64MB
- Type200-Pin DDR2 SO-DIMM
- SpeedDDR2 800 (PC2 6400)
- CAS LatencyCL6
- Timing6-6-6
- Voltage1.8V
- 2 GB capacity extends multitasking headroom on Presario Cq60 and Cq61
- DDR2 800 MHz speed matches PC2 6400 spec for correct timing
- 200-pin SO-DIMM form factor fits the notebook memory slot exactly
- Non-ECC unbuffered design meets the laptop's original memory requirements
- CMS lifetime warranty backs the upgrade with manufacturer confidence
2 GB DDR2 SODIMM for Presario Cq60 Cq61
This 2 GB DDR2 800 MHz SODIMM is built for HP and Compaq Presario Cq60 and Cq61 notebooks. It installs in a 200-pin slot and runs at 1.8 V with CL6 timing. The module is unbuffered, non-ECC and uses major-brand chips. Computer Memory Solutions guarantees compatibility with the listed models.
Not for other DDR2 systems
Laptops that need a different DDR2 speed, a different pin count or a registered module cannot use this stick. Systems that require ECC memory or a voltage other than 1.8 V are also unsuitable. Buyers upgrading a desktop or a server should look elsewhere. The kit contains a single 2 GB stick only.
PC2 6400 speed rating
The memory operates at the PC2 6400 (DDR2 800) data rate. This speed decides whether the module matches the notebook's memory controller. If the original specification calls for PC2 5300 or PC2 6400 this part will work; a different DDR2 speed rating means it will not.
Highlights
- 2 GB capacity extends multitasking headroom on Presario Cq60 and Cq61
- DDR2 800 MHz speed matches PC2 6400 spec for correct timing
- 200-pin SO-DIMM form factor fits the notebook memory slot exactly
- Non-ECC unbuffered design meets the laptop's original memory requirements
- CMS lifetime warranty backs the upgrade with manufacturer confidence
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256646400SO |
| Capacity | 64MB |
| Type | 200-Pin DDR2 SO-DIMM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Timing | 6-6-6 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Hp/Compaq Presario Cq60, Cq61 |
| Package Content | 1 Memory RAM Stick |
Questions about this item
How do I install the 200-pin DDR2 SO-DIMM into my Presario Cq60 or Cq61, and what step is often missed?
Power off the laptop and remove the battery. Open the memory compartment on the underside. Align the notch on the 200-pin module with the slot key, insert at an angle, then press down firmly until both side clips click. The step often missed is pressing down hard enough to engage both clips; a loose module will cause a no-boot condition.
What maintenance or replacement will this 2GB DDR2 800 module need over time?
The module has no heat spreader and uses unbuffered major-brand chips rated at 1.8 V. No scheduled maintenance is required. Keep the laptop vents clear so the memory stays within its thermal limits. If a memory error appears later, run a diagnostic such as MemTest86 to confirm the stick before replacing it.
What limit appears first when this CL6 6-6-6 DDR2 800 memory runs under sustained load?
The primary limit is the DDR2 800 (PC2-6400) bandwidth ceiling combined with CL6 latency. Under continuous heavy use the memory controller reaches its maximum throughput before the module overheats, since the chips are unbuffered and run at the standard 1.8 V without a spreader.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



