SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
$391.99
0.00501099BTC
In stock
Computer Memory Solutions
Computer Memory Solutions 4GB (2x2GB) DDR2 800MHz PC2-6400 CL6 Dell OptiPlex 360
A 4 GB dual-channel kit of two 2 GB DDR2-800 CL6 unbuffered DIMMs validated for the Dell OptiPlex 360 desktop
- Capacity4GB (2 x 2GB)
- Type240-Pin DDR2 SDRAM
- SpeedDDR2 800 (PC2 6400)
- CAS LatencyCL6
- Timing6-6-6
- Voltage1.8V
- Guaranteed Dell OptiPlex 360 compatibility
- 4 GB capacity from two 2 GB modules
- DDR2 800 MHz PC2-6400 speed rating
- CL6 6-6-6 timing for responsive operation
- 8 V unbuffered non-ECC DIMM design
Dell OptiPlex 360 compatible kit
This 4 GB kit contains two 2 GB DDR2 modules rated at 800 MHz with CL6 timings. It is built specifically for the Dell OptiPlex 360 desktop and uses the standard 240-pin DIMM form factor. The modules are unbuffered, non-ECC and run at 1.8 V. They fill both memory slots in the system for a straightforward upgrade.
Thermals and power in daily use
Without heat spreaders the sticks rely on case airflow, which is typical for DDR2 office desktops. At 1.8 V the power draw per module is low, so temperatures stay modest during normal office workloads. The unbuffered design adds no extra active components that would increase heat or noise. Standard chassis fans are usually sufficient to keep the memory cool.
Behaviour under sustained load
Running at the rated 800 MHz with 6-6-6 timings, the kit maintains stable operation during extended sessions such as large backups or long rendering jobs. The major-brand chipset and 2Rx8 organisation help preserve signal integrity over time. Because the OptiPlex 360 supports a maximum of 4 GB, this kit reaches the platform limit and cannot be expanded further.
Highlights
- Guaranteed Dell OptiPlex 360 compatibility
- 4 GB capacity from two 2 GB modules
- DDR2 800 MHz PC2-6400 speed rating
- CL6 6-6-6 timing for responsive operation
- 8 V unbuffered non-ECC DIMM design
Specifications
| Brand | Computer Memory Solutions |
|---|---|
| Model | CM256646400DIMMDR |
| Capacity | 4GB (2 x 2GB) |
| Type | 240-Pin DDR2 SDRAM |
| Speed | DDR2 800 (PC2 6400) |
| CAS Latency | CL6 |
| Timing | 6-6-6 |
| Voltage | 1.8V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Chipset | Major Brand Chipset |
| Heat Spreader | No |
| Compatible System | Dell Optiplex 360 Desktop |
| Package Content | 2 Memory RAM Sticks |
Questions about this item
How do I install the 240-pin DDR2 DIMMs in my OptiPlex 360, and what step is often missed?
Power off and unplug the system, open the case, align the notch on each 240-pin module with the slot key, press down firmly until both side clips click shut, then power on and verify 4 GB is recognised in BIOS.
What maintenance or replacement will this 2 x 2 GB kit need over time?
No routine maintenance is required; if a module fails, replace it with another 240-pin DDR2 800 MHz CL6 1.8 V unbuffered non-ECC DIMM to keep the dual-channel pair matched.
What limit appears first when the OptiPlex 360 runs sustained workloads with this memory?
The platform caps total memory at 4 GB across its two sockets, so capacity is the first ceiling you hit; the modules themselves run at their rated 800 MHz CL6 within the 1.8 V specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
