We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 204-pin DDR3 SODIMM stick, black chips, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 4GB DDR3 1333MHz CL7 SODIMM memory upgrade

SKU CH-XQM3-KCANK

4GB DDR3 1333MHz CL7 SODIMM module for compatible HP Pavilion G6 notebooks

  • Capacity4GB
  • Type204-Pin DDR3 SO-DIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL7
  • Timing7-7-7
  • Voltage1.5V
  • 4GB capacity adds multitasking headroom for everyday workloads
  • CL7 timing at 1333MHz delivers responsive memory performance
  • 204-pin SODIMM form factor fits compatible HP Pavilion notebooks
  • 5V operation matches standard DDR3 voltage requirements
  • Tested compatibility with G6-1B50Us, G6-1B53Ca, G6-1B54Ca models

Compatible SODIMM for HP Pavilion G6

This 4GB DDR3 module is built for HP Pavilion G6-1B50Us, G6-1B53Ca and G6-1B54Ca notebooks. It runs at 1333MHz with CL7 timing and 1.5V unbuffered operation. The 204-pin SO-DIMM form factor fits the two memory slots provided in these systems. Buyers who need ECC or registered memory cannot use this stick.

Upgrade from 1066MHz to 1333MHz

The notebooks ship with DDR3-1066 memory and support a maximum of 8GB across two slots. Installing this 1333MHz module raises the data rate while staying within the platform limit. The jump is worth it when the existing stick is slower or when a second slot is free and matched capacity is desired. Systems that already run at 1600MHz will not see a gain from this part.

Tool-free slot access on supported models

The SODIMM inserts into the 204-pin socket under the bottom access panel; no screws on the module itself. Alignment notches prevent backward insertion. What usually goes wrong is mixing CL7 with CL11 sticks, which can force the slower timing, or exceeding the 8GB total ceiling. The kit contains one stick; a second identical unit is needed for dual-channel operation.

Highlights

  • 4GB capacity adds multitasking headroom for everyday workloads
  • CL7 timing at 1333MHz delivers responsive memory performance
  • 204-pin SODIMM form factor fits compatible HP Pavilion notebooks
  • 5V operation matches standard DDR3 voltage requirements
  • Tested compatibility with G6-1B50Us, G6-1B53Ca, G6-1B54Ca models

Specifications

BrandComputer Memory Solutions
ModelCM5126410600SODRH
Capacity4GB
Type204-Pin DDR3 SO-DIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL7
Timing7-7-7
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHp Pavilion Notebook G6-1B50Us, G6-1B53Ca, G6-1B54Ca
Package Content1 Memory RAM Stick

Questions about this item

Will the 204-pin DDR3 SO-DIMM fit the two memory slots in my HP Pavilion G6-1B50Us?

Yes, the 204-pin DDR3 SO-DIMM matches the notebook's two SODIMM slots and the DDR3 SDRAM technology required by the G6-1B50Us, G6-1B53Ca and G6-1B54Ca models.

What is the correct way to seat the module so the 1.5 V DDR3 stick is recognised at 1333 MHz?

Power off the notebook, remove the battery, open the memory cover, align the notch on the 204-pin edge connector with the key in the slot, insert at about 30 degrees, then press down firmly until both retention clips click — the step most people skip is pressing evenly on both ends until the clips lock.

When should I expect to replace this 4 GB CL7 module if the notebook eventually supports up to 8 GB?

The module itself has no wear-out schedule; you would only replace it if you upgrade to the maximum 8 GB capacity using two 4 GB sticks or if a memory diagnostic reports errors.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.