We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 DIMM sticks in a row

Computer Memory Solutions

Computer Memory Solutions 64GB (4x16GB) DDR4 2400 CL17 DIMM memory upgrade - C120

SKU CH-JF90-488DW

64 GB kit of four 16 GB DDR4 2400 CL17 DIMMs for HP EliteDesk 705 G3 and 800 G2/G3 desktops

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 SDRAM
  • SpeedDDR4 2400 (PC4 19200)
  • CAS LatencyCL17
  • Timing17-17-17
  • Voltage1.2V
  • 64 GB total capacity from four 16 GB modules for high multitasking headroom
  • DDR4 2400 MHz speed with CL17 timing for responsive system performance
  • 2 V low-voltage operation reduces power draw and heat output
  • Unbuffered non-ECC 288-pin DIMM design fits standard desktop memory slots
  • Tested compatible with HP EliteDesk 705 G3, 800 G2 and 800 G3 series

HP EliteDesk DDR4 2400 kit

This 64GB kit contains four 16GB unbuffered DIMMs built to DDR4 2400 CL17 timings at 1.2V. The modules are 288-pin non-ECC memory validated for HP EliteDesk 705 G3 and 800 G2/G3 tower and small-form-factor systems. Each stick uses a 2Rx8 organisation with major-brand chips and no heat spreader.

Suits four-slot EliteDesk upgrades

The kit matches the 64GB maximum and four-slot layout of the listed EliteDesk models, so it fills every socket with a single purchase. Builders using systems with fewer slots, lower memory ceilings, or a requirement for ECC or registered modules will need a different specification.

288-pin DDR4 2400 DIMM interface

The modules plug into standard 288-pin DDR4 slots and run at 2400 MT/s with CL17 latency. If your motherboard uses a different pin count, voltage or memory generation, these sticks will not fit or function.

Highlights

  • 64 GB total capacity from four 16 GB modules for high multitasking headroom
  • DDR4 2400 MHz speed with CL17 timing for responsive system performance
  • 2 V low-voltage operation reduces power draw and heat output
  • Unbuffered non-ECC 288-pin DIMM design fits standard desktop memory slots
  • Tested compatible with HP EliteDesk 705 G3, 800 G2 and 800 G3 series

Specifications

BrandComputer Memory Solutions
ModelCM2048642400DIMM
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 SDRAM
SpeedDDR4 2400 (PC4 19200)
CAS LatencyCL17
Timing17-17-17
Voltage1.2V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemHP/Compaq Elitedesk 705 G3 MT/SFF, 800 G2 Series Tower/SFF, 800 G3 Series Tower/SFF
Package Content4 Memory RAM Sticks

Questions about this item

Should I buy the 64GB kit as four 16GB sticks or look for a different capacity?

The kit supplies 64GB in four 16GB modules, filling all four DIMM slots on the supported HP Elitedesk 705 G3 and 800 G2/G3 systems that max out at 64GB.

What does the 2400MHz rating actually deliver inside an Elitedesk 800 G3?

The modules run at DDR4 2400 with CL17 timing at 1.2V; the platform’s memory controller will operate them at that speed without overclocking.

Will these 288-pin DDR4 DIMMs work in a board limited to PC4-19200?

Yes, the sticks are rated PC4-19200 (DDR4 2400) and are unbuffered non-ECC, matching the slot and chipset requirements of the listed HP models.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.