We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 240-pin DDR3 DIMM modules without heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V DIMM - A69

SKU CH-DEPZ-AN01D

An 8 GB DDR3 kit of two 4 GB DIMMs running at 1333 MHz CL9 1.5 V, validated for MSI 770-G45, 785G-E53, 785Gm-E51 and 785Gm-E65 motherboards

  • Capacity8GB (2 x 4GB)
  • Type240-Pin DDR3 SDRAM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Timing9-9-9
  • Voltage1.5V
  • 8GB dual-channel kit boosts multitasking with two matched 4GB modules
  • DDR3 1333MHz CL9 timing delivers responsive desktop performance at standard voltage
  • 5V unbuffered non-ECC DIMMs install directly into 240-pin slots without configuration
  • Guaranteed compatibility with listed MSI 770 and 785 series motherboards
  • Major-brand chipset components ensure reliable operation across all four memory sockets

Compatible MSI DDR3 kit

This 8 GB kit contains two 4 GB DDR3 DIMMs rated at 1333 MHz with CL9 timings and 1.5 V operation. The modules are unbuffered, non-ECC, and use a 240-pin form factor. They are validated for MSI motherboards including the 770-G45, 785G-E53, 785Gm-E51, and 785Gm-E65 models.

Upgraders with listed MSI boards

Owners of the named MSI platforms who need a straightforward capacity increase to 8 GB will find this kit drops in without configuration. Builders targeting higher total memory, servers that require registered ECC modules, or systems limited to single-channel population should look elsewhere.

DDR3 1333 MHz speed grade

The decisive specification is the DDR3 1333 (PC3 10600) rating paired with CL9 9-9-9 timing at 1.5 V. If your board documentation calls for this exact speed and voltage, the kit will run at its rated settings; a different speed grade or voltage requirement means this is not the correct part.

Highlights

  • 8GB dual-channel kit boosts multitasking with two matched 4GB modules
  • DDR3 1333MHz CL9 timing delivers responsive desktop performance at standard voltage
  • 5V unbuffered non-ECC DIMMs install directly into 240-pin slots without configuration
  • Guaranteed compatibility with listed MSI 770 and 785 series motherboards
  • Major-brand chipset components ensure reliable operation across all four memory sockets

Specifications

BrandComputer Memory Solutions
ModelCM5126410600DIMM
Capacity8GB (2 x 4GB)
Type240-Pin DDR3 SDRAM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Timing9-9-9
Voltage1.5V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor Brand Chipset
Heat SpreaderNo
Compatible SystemMsi Motherboard 770-G45 785G-E53 785Gm-E51, 785Gm-E65
Package Content2 Memory RAM Sticks

Questions about this item

Should I pick the 2 x 4 GB kit or a single 8 GB module?

The kit contains two matched 4 GB DIMMs, letting you populate two slots for dual-channel operation on the supported MSI boards.

What does the 1333 MHz rating deliver in my system?

The memory runs at DDR3-1333 with CL9 9-9-9 timings at 1.5 V, so the controller transfers data at the rated 1333 MT/s.

Does the 240-pin DDR3 interface limit speed or capacity on these motherboards?

The 240-pin DDR3 DIMMs fit the four slots on the 770-G45, 785G-E53, 785Gm-E51 and 785Gm-E65, supporting up to 16 GB total.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.